Other Features Settings - Toshiba 32CV700E Owner's Manual

Stereo
Selecting the bilingual programmes
1
When a bilingual programme is received,
j Dual appears.
2
Press g to select the sound to be
heard. The sound differs according to the
transmission system: NICAM or German
stereo/bilingual broadcast.
Display
NICAM
Sub I sound
j Dual 1
Sub II sound
J Dual 2
Main sound
e Mono
Note:
These settings are not stored in the TV memory.
Selecting the monaural programmes
If sound distortion, interruptions or silence
arises in the low sound volume level, setting the
e Mono 2 mode will mitigate the problem.
1
When a monaural programme is received, e
Mono appears.
2
Press g to select a monaural mode that
is easy to hear. e Mono 1 and e Mono 2
appear cyclically to the screen.
Note:
On some cases, the reception of stereo/bilingual
broadcasts may not be possible after switching
on the e Mono 2 mode.
Adjusting the sound quality
1
From the SOUND menu, press s or r to
select an item you want to adjust.
2
Press v or w to adjust the settings as
required.
Selection
v
Bass weaker
Treble weaker
Balance decreases the
right channel
Using the TV's features
Sound to be heard
German stereo/
bilingual broadcast
Main sound
Sub sound
—
Pressing
stronger
stronger
decreases the
left channel
Using the Advanced Sound Settings
Bass Boost helps to create rich bass.
Voice Enhancement helps to emphasize
dialogue. It will be easier to hear voices over
other background audio.
1
From the SOUND menu, press s or r to
select Advanced Sound Settings, and then
press Q.
2
Press s or r to select the item you want to
adjust.
Advanced Sound Settings
Voice Enhancement
Bass Boost
Voice Enhancement : To turn the vocal
Bass Boost :
Using the Stable Sound
The Stable Sound function limits the highest
volume level to prevent extreme changes in
volume when the signal source changes (for
example, to prevent the sudden increase
in volume that often happens when a TV
programme switches to a commercial).
1
From the SOUND menu, press s or r to
select Stable Sound.
2
Press v or w to select On or Off.
Note:
The Stable Sound effect is active only when the
sound outputs from the speaker.

Other features settings

Selecting the TIMER menu
The Timer is especially useful if you want the TV
to turn itself on or off after a selected period of
time.
1
Press MENU, and then press v or w to
display the TIMER menu.
w 2
Press s or r to select the required timer
mode (Sleep Timer (Turn off the TV) or On
Timer).
3
Press the Number buttons (0-9), v or w to
set the On or Off delay time.
The timer display will set by 10 minutes, up to
12 hours and 50 minutes.
On
Off
emphasis effect On
or Off.
To select the desired
bass expansion level
On or Off.
19