Table of Contents
Advertisement
Available languages
Available languages
PLEASE READ CAREFULLY! Forpersonal
safety, t hisproduct m ustbeproperly g rounded.
Grounding
Instructions
The power cord of this appliance is equipped with a
3-prong (grounding) plug which mates with a standard
3-prong grounding wall receptacle to minimize the possibility
of electric shock hazard from this appliance.
The customer
should have the wall receptacle and circuit checked by a
qualified electrician to make sure the receptacle is properly
grounded and polarized.
Preferred
Method
Not, Under
Any Circumstances,
Cut, Remove,
or Bypass the
g Prong.
Power Supply
Grounding
Cord with
Type
3-Prong
Wall
Grounding
Receptacle
Plug
6.Assembly
of the Surface Burner Heads, Burner
Caps and Burner
Grates:
It is very important to make sure that all of the Surface Burner
Heads, Surface Burner Caps and Surface Burner Grates are
installed correctly.
Your appliance wa s shipped with the burner heads and burner
caps assembled in the correct locations (See Fig. 1).
Should you need to re-install the burner caps please refer to
the Use & Care Guide for more information.
REMEMBER--DO
NOTALLOW SPILLS, FOOD, CLEANING
AGENTS ORANYOTHER
MATERIAL TO ENTER THE GAS
ORIFICE HOLDER OPENING. Always keep the Burner Caps
and Burner Heads in place whenever the surface burners are
in use.
Burner
sizes
and cooktop
locations
Where a standard two-prong wall receptacle is encountered,
it is the personal responsibility and obligation of the customer
to have it replaced with a properly grounded three-prong wall
receptacle.
DO NOT, UNDERANY CIRCUMSTANCES, CUT OR REMOVE
THETHIRD (GROUND) PRONG FROM THE POWER CORD.
Front of cooktop_
Fig. 1
1.
2 Standard burners - 9,500 BTU.
2.
Min-2-Max
TM
- double burner - 18,000 BTU.
3.
Large burner- 14,000 BTU.
4.
Perfect Simmer burner TM-5,000 BTU.
Advertisement
Table of Contents
