Operation - Haier MWM10100SS Owner's Manual

English
20. INQUIRING FUNCTION
(1) In clock state, press " AM/PM " to display "A" or "M" for 3 seconds.
In cooking state, press " CLOCK/PRE-SET ", the LED will display clock for three seconds
and the "A" or "M" for another 3 seconds.
(2) In pre-set state, LED will display the clock and the seconds will be flashing at the same
time. Press " AM/PM " and "A " or "M" will be displayed for 3 seconds. Then press
" CLOCK/PRE-SET " to inquire the pre-set time. The pre-set time will be flashing for
3 seconds, then "A" or "M" will be displayed for another 3 seconds. After that, the oven
will turn back to the clock state.
(3) In the microwave cooking state, press " POWER " to inquire microwave power level, and
the current microwave power will be displayed. After three seconds, the oven will turn back
to the previous state. In the level 2 cooking state, the inquiring way can be done by the
same way as above.
21. COOKING END REMINDING FUNCTION
When the cooking is over, the buzzer will sound 5 "beep" to alert user the cooking is finished.
22. OTHER SPECIFICATIONS
(1) In standby state , if the set clock digital tube displays current time, the " : " would
flash; otherwise, it shows " 0:00 ".
(2) In setting function state, LED displays corresponding setting.
(3) In working or pause state, LED displays remainded cooking time.
(4) During working, if it pauses or opens the oven door, "
light on, after restarting, it will flash constandtly.
(5) After setting a procedure, if there are no any operation in 5 minutes, it would exit setting
status.
(6) Refer to the sample for other details.
" would
15