Frigidaire FEB386CESA Installation Instructions Manual page 5

Only certain cooktop models may be installed over cer-
tain built-in electric oven models, listed by the MFG ID
number (see the insert sheet included in the literature
package).
To reduce the risk of
personal injury and
tipping of the wall
oven, the wall oven
must be secured to
the cabinet (s) by anti-
tip brackets.
208/240 Volt junction box
for built-in oven.
Approx. 3"
(7.5 cm)
Side filler panels are necessary to iso-
late the unit from adjoining cabinets.
Panel height should allow for installa-
tion of approved cooktop models.
36" Min.
(91.4 cm) Min.
Use 3/4" (1.9 cm) plywood, installed
on two runners, flush with toe plate.
Must be capable of supporting 150
:)ounds (68 kg).
Cut an opening in wood base minimum 9" x 9"
(23 X 23 cm), 2" (5 cm) from left side filler
panel, to route armoured cable to junction box.
4 1/2" (1 1.5 cm) Max.*
* If no cooktop is installed directly over
the oven unit, 5" (12.7 cm) maximum
is allowed above the floor.
" 28 1/8" (71.4 cm) Min.
27 (68.6 cm) 24 7/8" (63.2 cm) Min. 23 1/2" (59.7 cm) Min. 28 5/8" (72.7 cm) Max.
Wall Oven 25 1/4" (64.1 cm) Max.
30" (76.2 cm) 28 1/2" (72.4 cm) Min. 28 1/4" (71.8 cm) Min.
Wall Oven 29" (73.7 cm) Max. 24" (61 cm) Min. 28 7/8" (73.3 cm) Max.
Figure 6 - TYPICAL UNDER COUNTER INSTALLATION OF AN ELECTRIC BUILT-IN OVEN
WITH AN ELECTRIC COOKTOP MOUNTED ABOVE