Declaration Of Conformity - Haier EA-1770EG Instructions For Use Manual

DECLARATION OF CONFORMITY

The manufacturer of the product/s described herein, to which this description refers,
declares on its sole responsibility that the product/s meet the relevant fundamental
safety health and protection requirements of the relevant EU guidelines and that
the corresponding test reports are available for examination by the relevant
authorities and can be requested from the seller of the appliance, especially with
regard to CE Declaration of Conformity issued by the manufacturer or with the
Manufacturer's approval.
Moreover , the manufacturer declares that the parts of the appliance described in
this user manual, which come into contact with fresh food, do not contain any toxic
substances.
Electricity schematic diagram
The Primary
interlock switch
L
L
(in)
(out)
MF MT
L
N N
E
(in) (out)
N
Thermostat Thermostat
E
The door
interlock switch The secondary
interlock
R
switch
G
CPU
RELAY RELAY
The Primary
interlock switch
MF
MT
L
N
Thermostat
Thermostat
E
The door
interlock switch The secondary
interlock
R
R
switch
G
W
CPU
RELAY RELAY
RELAY
HVC
F
FA
AK
Rectifier
DELAY EA-2080EG/EA-1770EG
CIRCUIT
This figure suits the
CE/GS certification
TAPI
R
W
HVC
F
FA
EA-2080EG/EA-1770EG
AK
Rectifier
This figure does not suit
the CE/GS
1. For your use safety, before installing this model of microwave oven, please take out the locating
spacer rods from the cavity (as illustrated in Figure 1 of the verso), and insert them respectively
into the two locating holes at lower part of the cavity rear panel as illustrated, so as to ensure go-
od ventilation between the microwave oven and back wall.(EA-1770EG)
certification
28. Small amounts of food require shorter cooking or heating time. If normal times are allowed they 28. Small amounts of food require shorter cooking or heating time. If normal times are allowed they
may overheat and burn. may overheat and burn.
13