Siemens S40 User Manual page 18

Hide thumbs Also See for S40:
Table of Contents

Advertisement

32
Calendar
First
Delete events Select this option to
delete all events older than a date
Enter the List menu
specified by you.
by pressing
Select »Calendar«
Receiving an event
An event will be indicated by
in the display, the phone will emit a
New event (continued)
ringing tone (if activated - see p.
As a minimum you will have to
52) and the LED on the top of the
enter the start date and start time
phone will flash green very fast.
(if you want to change the default
settings). The settings of the last 4
The first line of the event text will
event types are predefined by the
be visible in the display. Use
manufacturer, but you can always
see more of the text.
change these settings. See in the
The phone will continue ringing
description of the Setup menu on
for one minute if you do not
p. 65 how to change date and time.
acknowledge the event. Press
You can decide that an event
»DELETE/OK« or
should be recurring. A useful fea-
Press »REMIND« if you do not
ture if you have a weekly meeting,
have the time to read the event
or if you want to be reminded
text right now. The event will recur
about e.g. a birthday every year.
after 10 minutes. The phone will
repeat this sequence twice and
Show week View your appoint-
then display
ments for a whole week.
the symbol indicates the number of
Go to date Select a specific date.
missed events. Press
The events on the specified date
the contents.
will be listed as described under
The
»View events«.
List menu
the display as long as there are
events you have missed.
to
Facts & Tips
• A recurring event will be marked by
to the left of the starting time. If
you want to delete a recurring event,
to do so.
the telephone will ask you for confir-
mation to delete it.
• The number between the arrow
keys at the bottom of the display indi-
cates the week number.
. The digit above
• You can also synchronize your cal-
endar with the calendar in Microsoft
to see
Outlook on your PC by means of the
enclosed CD-ROM. To do this, install
symbol will remain in
the synchronization programme on
your computer.
List menu
IrDA
First
Receiving In order to receive mes-
sages, etc. via the infrared inter-
Enter the List menu
face, you have to activate the IrDA
by pressing
port in this submenu.
Select »IrDA«
If a connection is established suc-
cessfully, the IrDA port will auto-
IrDA
matically be deactivated 1 minute
after the end of the transmission.
The built-in IrDA modem allows
If no connection is established
wireless communication to take
within 1 minute, the IrDA port will
place between your phone and
automatically be deactivated, and
computer, provided your computer
you will have to activate it again to
is equipped with an IrDA interface
be able to receive a message.
as well, and provided you have
installed the necessary IrDA drivers
Synch and data Select this sub-
in advance.
menu to activate the synchroniza-
The CD-ROM supplied with the
tion and data capability.
telephone will provide you with the
required software and information.
Send business card The informa-
When communicating via IrDA,
tion defined by you in your Owner
the distance between your mobile
ID in the Setup menu (see p. 57)
phone and the computer should
can be sent as a business card to
not exceed 40 centimetres.
another device via IrDA.
You may operate your phone as fol-
lows:
33

Advertisement

Table of Contents
loading

Table of Contents