Bosch SRV53C03UC-30 Installation Instructions Manual page 5

Electrical Preparation
ELECTRICAL PREPARATION
Avoid Electrical Shock Hazard
Do not work on an energized circuit. Doing so
could result in serious injury or death. Only
qualified electricians should perform electrical
work. Do not attempt any work on the dishwasher
electric supply circuit until you are certain the
circuit is de-energized.
Avoid Fire Hazard
Make sure electrical work is properly installed,
Only qualified electricians should perform electri-
cal work.
Dishwasher Electrical Rating
Volts Hertz Amperes Watts
120 60 12
1,450
(max)
Electrical Supply
The customer has the responsibility of ensuring that the
dishwasher electrical installation is in compliance with a]l
national and local electrical codes and ordinances. The
dishwasher is designed for an electrical supply of 120V,
60 Hz, AC, connected to a dishwasher-dedicated,
properly grounded electrical circuit with a fuse or breaker
rated for 15 amps. Electrical supply conductors shall be a
minimum #14 AWG copper wire rated at 75°C (167°F) or
higher.
Avoid Fire Hazard
Make sure there are no loose electrical
connections, Make sure all electrical connections
are properly made.
Grounding Instructions
The dishwasher must be properly grounded before
operating. This appliance must be connected to a
grounded metal permanent wiring system, or an
equipment grounding conductor must be run with the
circuit conductors and connected to the equipment
grounding terminal or lead on the dishwasher. Make sure
that the dishwasher is connected to a suitable ground in
compliance with all local codes or, in the absence of a
local code, with the NATIONAL ELECTRICAL CODE in
the United States orthe CANADIAN ELECTRIC CODE
C22.1 -latest edition in Canada as well as any provincial/
state or municipal or local codes that appIy.
5