Choose Your Connection; Connection Options; Connecting A Vcr - Haier HL26K1 Owner's Manual

Installation
External Equipment Connections
NOTE: All cables shownare not includedwith theTV.
Choose Your Connection
There are several ways to connect your television,
depending on the components you wantto connectand
the quality of the signal you want to achieve. The
following are examplesof some different ways toconnect
your TVwith differentinput sources.
Connecting aVCR
Toavoid picture noise(interference), leave anadequate
distance between theVCR andTV.
Connection Option 1
Set VCRoutput switch to channel 3 or4 and then tune
the TVto thesame channel number.
Connection Option 2
1. Connect theaudio and videocabtes from theVCR's
output jacks to the TV input jacks, as shown in the figure.
When connecting theTV toVCR, match the jack colors
(Video =yellow,Audio Left =white, and Audio Right = red).
If you connect a S-VIDEO output from VCRto the
S-VIDEO input, the picture quality is improved;
compared to connectinga regular VCRto the Video input.
2. Inserta videotape intothe VCRand press PLAYon
the VCR. (Referto the VCRowner's manual.)
3. Selectthe input source with using the
INPUT button on the remote control, and
then press ,A,/ V button to select the source,
press ENTER button to confirm.
@@@@
© c O"
@@@@
Pb Pr L-AUD!O-R
©@
L-AUDIO "R
_L
DVI AUDIO J
©
VGA AUDIO VGA
12o
[]
[]
_ii;@ @ @ VCR
OUTPUT (R) AUDIO (L) VIDEO
10 TV LCD-TFT