Download Print this page

Inglis IJ40001 Installation Instructions

Hide thumbs Also See for IJ40001:

Advertisement

Part No. 3361044
IMPORTANT:
Read and save
these instructions.
IMPORTANT:
Installer: Leave Installation Instructions with
the homeowner.
Homeowner: Keep Installation Instructions
for future reference.
Save installation Instructionsfor local
electrical inspector's use.
Washer

Advertisement

loading

Summary of Contents for Inglis IJ40001

  • Page 1 Part No. 3361044 Washer IMPORTANT: Read and save these instructions. IMPORTANT: Installer: Leave Installation Instructions with the homeowner. Homeowner: Keep Installation Instructions for future reference. Save installation Instructionsfor local electrical inspector's use.
  • Page 2: Installation

    Hot and cold water faucets: Must Untape and open washer lid. Beforeyou start... be within 1.2 meters (4') of the back Remove all material from washer. of the washer and provide water Check location where washer will be installed. pressure 34 to 690 KPa (5-100 PSI). Proper installation is your responsibility.
  • Page 3 IMPORTANT'. THIS PROCEDURE MUST BE Now start... Use new hoses and washers that came FOLLOWED TO ASSURE PROPER INSTALLATION. with your washer. With washer in laundry area. Coupling Washer Clamp Insert a flat washer into each end of the inlet hoses. Check that washers are firmly seated in couplings.
  • Page 4 Open clamp • and slide over "hook" end of drain hose to secure the rigid and corrugated sections together. I! drain hose cannot be strapped in Insert legs into correct holes at each front place, it must be of exact length so the corner of washer until nuts touch washer, "hook"...
  • Page 5: Recessedarea Instructions

    Closet door Closet door Recessedarea instructions. 7.5 cm This washer may be installed in a (3") recessed area or closet. The installation spacing is the minimum 310 sq. cm (_ allowable. Additional spacing should be considered for ease of installationand servicing.