USER MANUAL WMF 1000 CoffEE MAChiNE English 0.40 WMF1000 33 0915 6010 2006.08...
Page 2
You will be impressed by the machine‘s technical design, its long service life and economical operation, and especially by the quality of the coffee it produces. The WMF 1000 pro coffee machine is a fully-automatic single-cup coffee machine for espresso, café crème, cappuccino, café latte, latte macchiato, hot milk, foamed milk and hot water.
Read this user manual before starting to prepare coffee. Only then can you operate all functions and the machine safely and spoil yourself with a wonderful coffee beverage. Additional components of the user manual: • Brief manual for beverage dispensing/care WMF 1000 user manual ...
Risk to machine Risk to user Attention! Attention! hot liquid hot surface Attention! Attention! Danger of electric shock Danger of hand injuries Tips and hints hint Cross-reference note about the figure Please always heed the safety instructions in Chapter 9. WMF 1000 user manual ...
Prior to the brewing cycle, coffee is briefly infused to ensure a more intensive release of its aromatic substances. Press Automatic pressing of coffee grounds prior to brewing cycle. Range For example: litre capacity of the tank filter Rinsing intermediate cleansing WMF 1000 user manual ...
Do not put the water tank back into the machine yet. The milk hose must be assembled first. insert the WMf tank filter Fill water tank with drinking The WMF tank filter ensures the best coffee quality and water protects the coffee machine against calcification. With water hardness 0-4, do not use a tank filter. Remove the screen built into the water tank ...
Fill the water tank with cold tap water (max. 2.8 litres) slide the water tank back into the machine Fill the water tank only with fresh, cold water. never use hot water, mineral water, milk or other liquids. WMF 1000 user manual ...
OK: P change: -/+ OK: P change: -/+ set the desired language for the display guidance here. The commissioning program uses the display to lead you step by step through the commissioning. Follow the display texts. WMF 1000 user manual ...
Commissioning The display goes out after 5 initial setting up initial setting up seconds. of your WMF 1000 of your WMF 1000 The set values can be changed The machine is switched on, the commissioning program in the “Settings” program after commissioning. leads you through the basic settings. Basic Settings set the desired values with the buttons. - + Use the P button to confirm the values and inputs. After ...
The coffee system rinse lasts approx. 40 seconds; after this, the machine is ready to operate. Cup size and beverage settings Your selection pls Your selection pls see Chapter 4 Settings 24.10.2006 24.10.2006 08:15 08:15 Select Confirm Care button Browse backwards – Reduce value Browse forwards + Increase value The new values are saved when you exit the program. WMF 1000 user manual ...
The lighting system helps you with navigation. Only the buttons which can be operated in the current situation are lighted. 3.2 Preparation of coffee beverages The WMF 1000 has four beverage buttons, each of which has two functions. overview of beverage buttons •...
1 x long (see overview of beverage buttons) Select Confirm Before preparing café latte: Care button 1x café latte 1x café latte Browse backwards milk lever down milk lever down – Reduce value Browse forwards + Increase value The new values are saved when you exit the program. WMF 1000 user manual ...
Strong (approximately 15 % stronger than the saved setting) Place an appropriate drinking vessel under the all-in-one spout set the desired coffee strength with the - + buttons select the beverage The beverage button selected lights up and the beverage name is indicated on the display. The selected beverage is prepared. See preparing beverage WMF 1000 user manual ...
• Do not use water-soluble, freeze-dried instant coffee. • Each brewing cycle via the manual insert is measured See Chapter 6 See Chapter 6 separately. Customer Care Customer Care • Coffee ground too fine can cause faults. > Cleaning the brewing uni > Cleaning the brewing uni WMF 1000 user manual ...
3.3 Dispense milk and milk foam At the touch of a button, the WMF 1000 dispenses hot milk and milk foam. press short press and hold 1 cup milk Milk/milk foam on request Milk/milk foam is dispensed as long as the button is pressed.
• never touch the beverages, rinse and cleaning water or steam during or directly after beverage dispensing! 3.6 Cancel beverage dispensing You can cancel the current beverage dispensing. Press the Off/C button WMF 1000 user manual ...
Put the all-in-one spout in a beverage dispensing position As soon as the all-in-one spout is back in a beverage dispensing position, the message disappears and the readiness display appears. WMF 1000 user manual ...
3.8 Switching on and off Switching on Press the Off/C button The greeting display appears, then the coffee machine heats up. WELCOME WELCOME WMF 1000 WMF 1000 Time from switching on until readiness state approx. 2 min. heating up ... heating up ... Place a container for the rinse water under the all-in-one spout (approx. 200 ml) After the machine is heated up, there is a coffee system ...
14.04.2006 08:15 14.04.2006 08:15 be hidden. See chapter 4 settings > basic settings Manual switch-on for timer operation Press the Off/C button short In timer operation, the machine switches on again imme- diately before the automatic set time. Manual switch-off for timer operation Press the Off/C button for approx. 2 seconds The machine switches off and the timer is no longer active. WMF 1000 user manual ...
13-16 OK: P change: -/+ water filter: no OK: P change: -/+ brewing temp.: 92°C OK: P change: -/+ Select factory sett.: no Confirm OK: P change: -/+ Care button Browse backwards – Reduce value Browse forwards + Increase value The new values are saved when you exit the program. WMF 1000 user manual ...
Press the desired beverage button. The beverage will be dispensed with the newly-set values. Each setting can be tested during setting. 4.2 Beverage settings • Water volume • Coffee strength • *Milk volume • *sequence of the dispensing of milk and coffee • Pre brew (aroma development) *Menu elements only available for beverages with milk WMF 1000 user manual ...
25 sec. milk volume: 25 sec. OK: P change: -/+ OK: P change: -/+ The volume dispensed depends on the milk lever posi- tion, the milk temperature and the milk nozzle selected. Determine the desired volume with a dispensing test. WMF 1000 user manual ...
Set and test detail The coffee grounds swell and the coffee aroma can See develop. Set water quantity Page 27 Dispensing test Test: Each setting can be tested during setting. Select Confirm Care button Browse backwards – Reduce value Browse forwards + Increase value The new values are saved when you exit the program. WMF 1000 user manual ...
Attention! OK: P change: -/+ OK: P change: -/+ If timer operation is activated, the machine switches on again here you can set how many minutes after the last at the set switch-on time. beverage preparation the coffee machine should switch off automatically. switch-off time 0 min -> switch-off time deactivated. WMF 1000 user manual ...
Off/C button has been pressed, the message appears: reset all counters reset all counters No: - No: - Yes: + Yes: + Keep the counters: press the minus button Delete all counters: press the plus button WMF 1000 user manual ...
Correct setting: Check your setting by preparing a double shot of espresso. if the dispensing stream is interrupted here or if the display indicates a flow fault, set the grinding degree at least one turn coarser again. WMF 1000 user manual ...
Care Chapter 6 Care The care of your WMF 1000 is especially important. The display notifies you as soon as the WMF 1000 must be rinsed, cleaned or descaled. 6.1 Care program, general When switching the machine on and off, an automatic coffee system rinse starts automatically.
Water tank ground coffee hopper WMF assumes no liability for damage due to lack of cleaning or descaling or due to the use of other cleaning or descaling agents than those provided by WMF. All guarantee and warranty claims are extinguished.
Place an appropriate container under the all-in-one spout issue the request with the P button start the rinse with the care button The pipes of the coffee machine are rinsed with hot water. Hot rinse water is emptied through the all-in-one spout. After the rinse, the readiness state display appears. your selection pls your selection pls 08:15 08:15 14.04.2006 14.04.2006 WMF 1000 user manual ...
The coffee machine‘s milk system is rinsed with hot water. Hot rinse water is emptied through the all-in-one spout. After a successful rinse, the following display appears: lower spout lower spout into beverage position into beverage position Turn the milk hose anticlockwise, disconnecting it from the hot water spout WMF 1000 user manual ...
See Chapter 6.3 Duration of cleaning program approx. 5 minutes. refill water tank refill water tank place 3l container place 3l container under coffee outlet under coffee outlet Place an appropriate container (min. 3 litres) under the all-in-one spout WMF 1000 user manual ...
Page 37
Off/C button. Cleaning must take place within the next 50 brew cycles, however at the latest on the next day. Otherwise, beverage dispensing will be blocked. The blocking will be cleared after a cleaning. WMF 1000 user manual ...
14.04.2006 14.04.2006 Depending on the water hardness and the water flow, but after 3 months at the latest, the request appears to change the tank filter. The filter change can be put off with the Off/C button. WMF 1000 user manual ...
Pull the water tank out of the machine towards the front Remove the filter cartridge if a tank filter is used (important) Empty a whole bottle of WMF liquid descaling agent (750 ml) into the water tank Fill the water tank with water ...
The water hardness, the water flow and whether a tank filter is used determine the schedule for descaling. The time will be calculated by the WMF 1000 and the request will appear. The descaling can be put off with the Off/C button, however it must be carried out within the next 50 brew cycles.
[4] [5] [6] Taking apart the all-in-one spout WMF special cleaner for milk Mix 5 ml WMF special cleaner for milk foamers in a foamers container with 200 ml lukewarm water Order no. 33.0683.6000 Place all parts of the milk system in the cleaning With the brushes included in the ...
Page 42
Place the milk hose on the all-in-one spout [10] Replace the all-in-one spout and push it into the lowest beverage position [11] [12] insert the milk hose in the guide [13] [14] [15] WMF 1000 user manual ...
Use the multitool from the accessories. Unscrew the thread on the brewing unit head with the multitool anticlockwise until the scraper folds out forwards Tip the insertion unit approx. 45 degrees upwards multitool until the brewing filter is visible WMF 1000 user manual ...
Page 44
Close the side doors if the brewing unit cannot be inserted completely: Turn thread on the brewing unit head slightly to the left or right with the multitool until the brewing unit slides into the guide. Never use force! WMF 1000 user manual ...
Check smooth running of the float (red plastic part) in the guide Replace the water tank heavy calcium deposits can be removed with the WMF descaling agent. After descaling, rinse the water tank very thoroughly in order to remove all the descaling debris.
With correct installation, service, care and cleaning WMF coffee machines meet the abovementioned require- ments. if the care and cleaning of the coffee machine is not carried out properly, the dispensing of milk bever- ages becomes a hazard with respect to food hygiene.
Page 47
• if a pre-refrigerated, freshly-opened milk package approx. 20 cappuccinos. is consumed within 3 hours maximum, refrigeration WMF AG offers various cooling during operation may not be necessary. possibilities • if milk consumption is lower, then the pre-refrigerated milk must be cooled during operation.
Bean hopper is empty There are not enough coffee beans in refill beans the coffee bean hopper confirm beverage grinding is interrupted Pour coffee beans into the bean hopper Press the beverage button again The grinding process continues and the additional coffee required for the brewing cycle is ground The selected beverage is then brewed. WMF 1000 user manual ...
Close the right-hand side door Close lock completely Lower spout The all-in-one spout is in the milk lower spout into system rinse position beverage position Push the all-in-one spout further down- wards into a beverage position WMF 1000 user manual ...
WMF service hotline! some messages lead to blocking of individual functions. You will notice this by the fact that the beverage button light goes out.
Page 51
switch off pre-brew EEPROM Error switch machine on/off If the error repeats, the fault must be eliminated by the WMF 1000 Service-Center. See chapter WMF 1000 Service-Center Motor driver error switch machine on/off If the error repeats, the fault must be eliminated by the WMF 1000 Service-Center. grinder blocked The grinders are blocked by foreign bodies: To eliminate, see section “Manual cleaning”...
Milk lever is not all the way up for milk foam or not all the way down for milk All-in-one spout: lightly smear o-rings with WMF sealing grease and Assembly/disassembly make sure that no grease gets into the air intake...
Page 53
Brewing unit is not in the basic setting longer be pulled out or Close the right side door and switch machine on inserted The brewing unit can be adjusted using the multitool until the brewer can be inserted WMF 1000 user manual ...
Messages and tips Chapter 9 Safety 9.1 hazards for the user At WMF, safety is one of the most important product features. The effectiveness of safety devices is only warranted if the following points are observed: • Read the user manual carefully before use •...
• With water with a carbonate hardness in excess of 5°dKh a WMF tank filter should be used; otherwise the coffee machine can be damaged due to build-up of scale. •...
For countries outside the EC, the respectively-valid national rules apply. The operator of such equipment must ensure regular servicing by WMF Customer service technicians, their agents or other authorised persons and check the safety devices. The operator must ensure that the electrical equipment and operating facilities are in a fit state (e.g.
Safety WMF shall always have the opportunity to rectify faults within an appropriate period. Claims above and beyond these, especially damage claims as a result of consequential damage, are - to the extent that is Warranty period 12 months legally permissible - excluded.
10.1 WMf 1000 Service-Center This procedure applies only in germany. Do you have a question about the operation or function If the location of the WMF 1000 of your WMF 1000 ? Call our WMF service hotline or send is outside of Germany, please us an e-mail. contact the WMF branch office in your country. •...
200 mm space on the right side of the machine for brewer disassembly. Weight empty approx. 19.0 kg Weight of brewer 1.2 kg Cable length approx. 1.0 m item number 03 0500 0001 Manufacturer WMF group WMF 1000 user manual ...
Water filter 200 33 2332 2000 1 piece Adapter for water filter 33 2332 0000 order numbers for the WMf customer care program 1 pack Cleaning tablets (blister 3x10 pieces) 33 2306 2000 1 bottle Milk foam cleaner (1 litre)
Page 61
33 2356 6010 • installation manual • User manual • Brief manual daily cleaning WMF 1000 • Return delivery ticket WMF 1000 • WMF carbonate hardness test (with manual) Cleaning agents, cleaning solutions and descaling agents are irritants for people, textiles and for the plastic parts of the machine.
Page 62
Beverage settings 26 hot water button 21 Brewing temperature 30 Browse 8 Browse forwards with plus 8 insert the WMF tank filter 11 introduction to settings 8 Call customer care programs 33 Cancel beverage preparation 21 Care program, general 32...
Page 63
54 scope of delivery 60 second type of coffee 19 sequence milk and coffee 28 Warm-up rinse 34 service ticket WMF 1000 58 Warranty period 57 set the grinding degree 31 Water filter 60 setting 25 Water hardness 14...