Switch On/Off; Dial A Number - Haier V280 User Manual

3. Do not pull out the plug of the charger
during the charging to avoid harming of the
phone and charger.
1.5

Switch on/off

Press and hold the end key
phone power ON/OFF.
If you have set PIN code, please enter PIN
after switch on your phone.
Input PIN code
User can set protection code (PIN CODE) in
order to prevent random using of your others.
Each time you restart your phone, the phone
will ask you to input PIN code Input PIN code
(In order to security, * will be shown on the
screen to replace the number you input.)
Press OK, and after a short time, your mobile
phone will confirm its correctness register on
the network. Once the network name is
shown on the screen, you can a call. If no
network name is shown on the screen, you
14
need to register again.
Note:- (a) To enter the security menu Default
PIN is 0000 (Four times zero).
(b)To Enabled / Disable PIN Default PIN is
1234.
makes the Input wrong PIN code
If user make a wrong input, you can press
(right soft key icon)
Fifteen continuous wrong inputs of PIN code
will lock the UIM card. In this condition phone
ask for PUK (PIN Unlocking key) . User can
get PUK from service provider customer care.

1.6 Dial a number

User can only use the function only after
the network name is shown on the screen.
Input state code and telephone number or
mobile phone number, press
to re-enter numbers.
to dial.