Yamaha YFM25BX Owner's Manual page 125

5. Check and, if necessary, tighten the battery
lead connections and correct the breather
hose routing.
6. Install the battery cover.
To store the battery
If the ATV will not be used for more than one
month, the battery will need to be removed and
stored as follows.
1. Remove the battery cover by pulling it upward.
2. Disconnect the negative battery lead.
3. Remove the battery bracket by removing the
bolts.
4. Disconnect the positive battery lead.
1. Battery
2. Battery bracket
3. Bolt
4. Positive battery lead (red)
5. Negative battery lead (black)
5. Remove the battery, fully charge it, and then
place it in a cool, dry place.
ECB00600
CAUTION:
Do not leave or store the battery on its side.
6. If the battery will be stored for more than two
months, check the specific gravity of the elec-
trolyte at least once a month and fully charge
the battery whenever necessary.
8-38
8