Table of Contents
Advertisement
Matrix Settings
5-2. Setting ON/OFF
From the initial screen, press the MONITOR button,
and then press the MENU button to display the
[MATRIX CONTROL] menu.
Press the 4 button to display the [TIME SET] menu. (In
MATRIX, wait for data loading completion.)
Move the joystick to select the TIME/DATE ON/OFF
from the MATRIX screen, and then press the "FOCUS
+" button.
Move the joystick up/down to select a monitor, move it left/right to select ON/OFF.
Press the "FOCUS +" button to save.
5-3. Setting DISPLAY POSITION
From the initial screen, press the MONITOR button,
and then press the MENU button to display the
[MATRIX CONTROL] menu.
Press the 4 button to display the [TIME SET] menu. (In
MATRIX, wait for data loading completion.)
Move the joystick to select the DISPLAY POSITION
from the MATRIX screen, and then press the "FOCUS
+" button.
Move the joystick up/down/left/right to move the display position.
Press the "FOCUS +" button to save.
Caution
• ERROR may occur if operated before data is fully loaded.
16
VIDEO METRIX SWITCHER
MONITOR:01[ON]
Move Position with a Joystick
Press ENTER, SAVE
2006/10/10/08:00:00
User's Manual
Symptom
Check if....
No power.
Is power supply normal?
Power is on but nothing is
Is keyboard connection normal?
happening.
Cameras are not displayed
Do camera inputs on the back
in order on the monitor.
match the actual camera
numbers?
Cameras cannot be
Is Video card (SMV-25632)
displayed on a certain
inserted properly into the
monitor.
corresponding slot?
Is connector securely
connected to the monitor in
question?
One of the connected
None of the monitors display
cameras cannot be
the camera in question?
displayed.
Only certain monitors do not
display the camera?
Pan/Tilt functions are not
Is data line connected properly?
working.
(+, - )
Do camera numbers in the
controller match the R/X
numbers?
* You must turn the power off when inserting/removing a card into/from this device.
VIDEO METRIX SWITCHER
Check List
Perform
Reconnect after checking the
power supply.
Check the keyboard connection.
Check the camera inputs on the
back against the actual camera
numbers.
Check if the video card is inserted;
with a little force, push the video
card once more.
Check the connector connection;
check the power on VCR/monitor.
Check the connection between the
camera in question and the main
CPU; check the power on the
camera.
Carefully reinsert the video card
into the corresponding monitor.
Check the polarity and the
connection of the data line.
Reassign the R/X or the controller
numbers.
17
User's Manual
Advertisement
Table of Contents
