Haier HDU-42CF03/H Operating & Installation Manual page 11

Operation
AUTO RUN, COOL,HEAT and DRY
Recommendations
(1) Unit start
Press ON/OFF button, unit starts.
Previous operation status appears on display
(Not Timer setting). Power indicator lights up.
(2) Select operation mode
Press MODE button. For each press, operation mode
changes as follows:
AUTO COOL
Unit will run in operation mode displayed on LCD.
Stop display at your desired mode.
(3) Select temp. setting
Press TEMP button
Unit will start running to reach the temp. setting
on LCD.
Use COOL in summer.
Use HEAT in winter.
Use DRY in spring,autumn and in damp climate.
DRY HEAT FAN
(4) Fan speed selection
Press FAN button. For each press, fan speed changes
as follows:
LOW
(5) Unit stop
Press ON/OFF button.
Only time and room temp remains on LCD.
All indicators go out.
Vertical flap closes automatically.
Hints
Wire controller can memorize each operation
status. When starting it next time, just press
ON/OFF button and unit will run in previous
status.
10
AUTO
MID HIGH AUTO