Advertisement
Quick Links
SURGEON'S SCRUB SINK
• Vitreous china
• Low front rim
• Wall hanger
• For wall hanger (included) or for
exposed bracket support [381mm (15")
painted brackets available]
❏
9047.044 Faucet holes on 203mm (8") centers
❏
9047.093 Single center faucet hole (Illustrated)
Nominal Dimensions:
711 x 559mm
(28" x 22")
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2 for Vitreous China Fixtures
To Be Specified:
❏ Gooseneck Spout: 7522.055
❏ Knee Action Mixing Valve: 7676.029
❏ Grid Drain: 7716.020
❏ Trap:
❏ Nipple:
❏ Painted Bracket Support: 485742-600 (2 req'd)
❏ Flex Tempered Supply (by others):
Available in White Only
© 2008 AS America Inc.
254mm
(10)
FINISHED WALL
127mm
(5)
356mm
(14)
25mm
(1)
381mm (15) BRACKETS (485742-600)
TO BE ORDERED SEPARATELY
1-1/2 N.P.T..
WASTE OUTLET
1-1/2 O.D.
TAILPIECE
FINISHED FLOOR
NOTES:
*
DIMENSION SHOWN FOR LOCATION OF "P" TRAP IS SUGGESTED.
15" PAINTED SUPPORT BRACKETS 485742-600 AVAILABLE AND MUST
BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
M30
SURGEON'S
SCRUB SINK
VITREOUS CHINA
457mm
(18)
76mm
(3)
559mm
C L
711mm
(28)
MIXING VALVE BODY
T-7F HANGER
356mm
(14)
133mm
(5-1/4)
305mm
445mm
(12)
*
425mm
(17-1/2)
C/L OF
(16-3/4)
TEMP.
146mm
SUPPLY
(5-3/4)
76mm
(3)
73mm
(2-7/8)
292mm
76mm
76mm
(11-1/2)
(3)
(3)
C/L OF 3/8 N.P.T.
SUPPLIES
Revised 8/05
(22)
140mm
(5-1/2)
914mm
(36)
Advertisement
