Advertisement
Quick Links
T H E
"
C O L L E C T I O N
by
ASSEMBLY & INSTALLATION
INSTRUCTIONS
®
CONSOLE TABLE
7483.002
7483.295
Thank you for selecting our products...products which have been the benchmarks of fine quality for over 100 years.
To help insure that the installation process will proceed smoothly, please read these instructions carefully before you
begin. Also, review the recommended tools and materials list; carefully unpack and examine your new plumbing fixture.
Recommended Tools & Materials
Adjustable Wrench
Basin Wrench
Channel Locks
Pipe Wrench
10'
Tape
Tubing Cutter
Measure
Hacksaw
Drill
Regular Screwdriver
Phillips Screwdriver
P r o d u c t n a m e s l i s t e d h e r e i n a r e t r a d e m a r k s o f A m e r i c a n S t a n d a r d I n c .
© A m e r i c a n S t a n d a r d I n c . 2 0 0 4
"
®
Roughing-in Dimensions
Saber Saw
0283.000
Plumbers' Putty or
8710.000.002
Caulking
8710.000.095
Putty Knife
Level
FINISHED WALL
10-1/4
(260mm)
STANDARD® CONSOLE PEDESTAL TOP
CONSOLE TABLE LEGS (Chrome)
CONSOLE TABLE LEGS (Satin)
FINISHED WALL
36
(914mm)
FINISHED
9-1/2
FLOOR
(241mm)
- 1 -
13
(330mm)
32
(813mm)
26-5/8
(676mm)
8
(203mm)
SUPPLIES
1-1/4 O.D.
WASTE
1-1/4 O.D.
TAILPIECE
22
(559mm)
(610mm)
17
(432mm)
7 30 5 2 0- 10 0 R ev. D
3-7/8
(98mm)
3/4
(19mm)
20
(508mm)
8-1/2
(216mm)
24
Advertisement
Related Manuals for American Standard Standard Console Table 7483.002
Summary of Contents for American Standard Standard Console Table 7483.002
- Page 1 T H E “ C O L L E C T I O N ASSEMBLY & INSTALLATION INSTRUCTIONS ® CONSOLE TABLE 7483.002 7483.295 Thank you for selecting our products...products which have been the benchmarks of fine quality for over 100 years. To help insure that the installation process will proceed smoothly, please read these instructions carefully before you begin.
- Page 2 6, 7 Remove lower leg support / adjustable foot assembly (items 2 & 3) from accessories box and screw them completely onto the 4 threaded rods (item 5). Unscrew the 2 front leg trumpets (item 6) and 2 rear leg trumpets (item 7) from the threaded rod (item 5).
- Page 3 36" 30-3/4" WASTE FINISHED FLOOR Fig. 1 Position hanger according to Step 1, making sure its center is aligned with the waste hole centerline (Fig. 1). Mark the hanger screw locations through its mounting holes. Drill pilot holes in positioning screw slots of hanger (Fig. 2). We recommend using two people for installation.
- Page 4 This warranty shall be void if the product has been moved from its initial place of installation; if it has been subjected to faulty maintenance, abuse, misuse, accident or other damage; if it was not installed in accordance with American Standard's instructions; or if it has been modified in a manner inconsistent with the product as shipped by American Standard.