Voice Vlan; The Global Screen - ZyXEL Communications GS1900 Series User Manual

Chapter 19 Configuration: VLAN
Figure 94 Configuration > VLAN > Guest VLAN > Port > Edit
The following table describes the labels in this screen.
Table 76 Configuration > VLAN > Guest VLAN > Port > Edit
LABEL
Port
Port List
State
Apply
Cancel

19.4 Voice VLAN

The Voice VLAN feature enables voice traffic forwarding on the Voice VLAN, then the switch can
classify and schedule network traffic. It is recommended that there be two VLANs on a port - one
for voice, one for data. Before connecting the IP device to the switch, the IP phone should configure
the voice VLAN ID correctly. It should be configured through its own GUI.
Use this screen to view and configure voice VLAN settings.

19.4.1 The Global Screen

Use this screen to configure the global Voice VLAN settings. Click Configuration > VLAN > Voice
VLAN > Global to open this screen.
114
DESCRIPTION
Displays the list of port index numbers that are being configured.
Enable/Disable the guest VLAN feature.
Click Apply to save the changes.
Click Cancel to discard the changes.
GS1900 Series User's Guide