Kenwood KDV-U4349 Instruction Manual page 11

Item Setting
"ZONE2" "F"/ "R"*
"AUTO1"/ "AUTO2"/ "AUTO1"*/ "AUTO2"/
"MANUAL" "MANUAL"
"CRSC" "OFF"/ "ON"*
"NAME SET"
"P/N" "PAL"/ "NTSC"
"M/V"
"ABOOK" "SL"/ "NM"/ "FA"
"SKIP" "0.5%"*/ "1%"/
"5%"/ "10%"
"iART" "OFF"/ "ON"*
"FILETYPE" > "DISC" "A/V"/ "PIC"
> "USB"
"SCL" "AUTO"*/ "MANU"
"AUX" "OFF"/ "ON1"*/
"ON2"
"DEMO" "OFF"*/ "ON"
"DIVX"
"iPodCTRL"
Item Setting
"iPodCTRL" "HANDS ON"/
"MODE OFF"*
"DSP"
Item Setting
"CONTROL" "EQ"
"B.BOOST" "OFF"*/
"STEP1"/ "2"
"HIGHWAY" "OFF"/
"STEP1"/ "2"/
"3"*/ "4"
"POSITION"
"SETUP" "CABIN"
"SPEAKER"
"DTA"
"X'OVER"
"PRESET" "RECALL"
"MEMORY"
"DSP SET" "BYPASS"/
"THROUGH"*
Entry Setting overview
4/ ¢
Specifies the destination of sub source sound when the Dual
Zone function is turned on.
4/ ¢
Selects the tuning mode of the radio.
4/ ¢
Switches to Monaural to decrease noise when reception is poor.
1 sec.
Sets the display when switched to AUX source.
4/ ¢
Sets the color system for the monitor. You have to turn the power
off after the setting is changed.
Displays the firmware version of Microvision.
4/ ¢
Sets the audio book playback speed.
4/ ¢
Sets the ratio of skip performed with <Music/Video Search for
iPod>.
4/ ¢
Specifies whether or not the artworks of the music files are
displayed.
4/ ¢
Selects playback file type when a disc or USB contains different
types of files.
You can make advanced settings in the "FILE TYPE" of the Setup
menu. "A" or "V" may appear on the display after setting.
4/ ¢
Specifies whether the text is scrolled automatically.
4/ ¢
Sets whether to display AUX during source selection.
2 sec.
Specifies whether to enable demonstration.
Display the format version of DivX.
Entry Setting overview
When set to "HANDS ON", allows you to operate iPod with the
AUD
control on the iPod.
Entry Setting overview
[AUD] Sets the sound quality.
Sets the Bass Boost level in two steps.
AUD
Compensates the low volume or bass sound being lost by road
AUD
noises to make vocal sound clearer.
[AUD] Compensates the sound environment in accordance with the
listening position.
[AUD] Selects the car type to compensate the distance difference
between each speaker.
[AUD] Sets the connected speaker, speaker size, and installation
position.
[AUD] Makes fine adjustment of the compensation value specified at
Cabin.
[AUD] Makes fine adjustment of the X'Over value specified at Speaker.
[AUD] Registering the value setup by Sound Control. Recalling the
sound setup registered by <Audio Preset Memory>.
[AUD] Registering the value setup by Sound Control.
Setting "BYPASS" passes the DSP function.
AUD
Setting "THROUGH" activates the DSP function.
Condition Page
32
31
—
14
— —
—
—
21
—
13
— —
31
— 7
—
Condition Page
22
Condition Page
25
—
32
26
27
27
28
28
29
29
—
11
|
English