Test Operation - Haier 10557172 Operation Manual

Operation
EMERGENCY OPERATION AND TEST OPERATION
EMERGENCY OPERATION
Carry out this operation only when the remote
controller is defective or lost.
Unit start
When the emergency operation switch is
pressed, a sound you can hear, which
means the start of this operation.
Follow the requirements below.
Room
Designated
temperature
temperature
o
>23 C
26
o
23 C
23
*
Unit stop (to cancel emergency operation)
Press the emergency switch and hear a sound, the unit stops.

TEST OPERATION

Use this switch in the test operation when the room
temperature is less 16
operation.
Unit start
Continue to press the test operation switch
for more than 5 seconds. After you hear the
"BI" sound twice, release your finger from
the switch, the test operation starts and the
air conditioner starts with the air flow speed
setting "Hi".
Unit stop(to cancel test operation)
Push the test run switch or operate with remote controller to cancel the test run.
If you use the remote controller to cancel the test run, the conditioner will then run as
per the working mode displayed on the remote controller.
Air flow
Timer
speed
mode
o
C None AUTO
o
C None AUTO
o
C, do not it in the normal
ON/OFF
Operation
Anion
mode
COOL None
HEAT None
ON/OFF
19
POWER TIMER
EMERGENCY SWITCH
TIMER
POWER
TEST SWITCH
RUN
RUN