Dry Operation - Haier 10518526 Operation Manual

Operation

Dry Operation

(1) Unit start
Press ON/OFF button, unit starts.
(2) Select operation mode
Press MODE button. For each press, operation
mode changes as follows:
COOL DRY
Unit will run in operation mode displayed on LCD.
Stop display at your desired mode.
(3) Select temp. setting
Press TEMP button.
Every time the button is pressed, temp. setting increases 1
Every time the button is pressed, temp. setting decreases 1
Unit will start running to reach the temp. setting on LCD.
(4) Fan speed selection
Press FAN button. For each press, fan speed changes
as follows:
AUTO
Unit runs at the speed displayed on LCD.
In DRY mode, when room temperature becomes
lower than temp.setting+2
at LOW speed regardless of FAN setting.
Hints
Remote controller can memorize each operation status. When starting it next time,
just press ON/OFF button and unit will run in previous status.
HEAT
HI
MED
o
C,unit will run intermittently
o
C
o
C
LO
COOL operation starts when room
temp. is higher than temp. setting.
Temp. setting+2
Temp. setting
8
ON/OFF TEMP
1
3
6
MODE
SET
2
FAN
TIMER
4
SWING CLOCK
5
POWER/SOFT
HEALTH
LOCK
RESET
Ultra-low air flow
o C
On reaching temp. setting, unit
will run in mild DRY mode.
3