Narrow (Nar) One-Touch If Filter Selection - Yaesu FTdx5000 Series Operating Manual

NARROW NAR O
VFO-A "One-Touch Narrow" Operation
Press the [ A ] button to activate VFO-A (the button will
glow red).
Pressing the [ NAR ] button engages a narrow IF DSP
filter.
Pressing the [ NAR ] button once more returns the band-
width control to the Width/Shift system. The factory
default of the bandwidth is as shown below.
A :
When the narrow bandwidth is selected, the "
will appear in the display, and the bandwidth depiction in
the SUB DISPLAY- window will be narrowed (if SUB
DISPLAY- window is showing the bandwidth).
[ A ] Button
[ NAR ] Button
MODE
LSB/USB
RTTY ( LSB )
PKT ( LSB/USB )
PKT ( FM )
A :
You may select the display pattern shown in the SUB DIS-
PLAY window from three patterns via Menu item "019
DISP SELECT". See page 122 for details.
FT 5000 O
DX
I
NE
" icon
OFF
2.4 kHz ( 1.5 kHz - 4.0 kHz / 17 steps )
2.4 kHz ( 500 Hz - 2.4 kHz / 7 steps )
CW
500 Hz ( 500 Hz - 2.4 kHz / 7 steps )
500 Hz ( 500 Hz - 2.4 kHz / 7 steps )
25 kHz ( ±5.0 kHz Deviation)
AM 9 kHz
25 kHz ( ±5.0 kHz Deviation)
FM
M
R
-T IF F
OUCH ILTER
VFO-B "One-Touch Narrow" Operation
Press the [ B ] button (the button glows orange).
Pressing the [ NAR ] button engages a narrow IF DSP
filter.
Pressing the [ NAR ] button once more returns band-
width control to the Width/Shift system. The factory
default settings of the bandwidth are as shown in the
table below.
A :
When the narrow bandwidth is selected, the "
will appear in the display, and the bandwidth on the SUB
DISPLAY- will be reduced, (if the SUB DISPLAY-
window indicates the bandwidth).
[ NAR ] Button
NAR B
ON
1.5 kHz ( 200 Hz - 1.5 kHz / 8 steps )
500 Hz ( 50 Hz - 500 Hz / 10 steps )
300 Hz ( 50 Hz - 500 Hz / 10 steps )
300 Hz ( 50 Hz - 500 Hz / 10 steps )
12.5 kHz ( ±2.5 kHz Deviation)
6 kHz
12.5 kHz ( ±2.5 kHz Deviation)
S 3
S
ELECTION
[ B ] Button
Page 65
" icon