Setting Up An Action Rule - Axis P3363–VE User Manual

AXIS P3363–VE
Events
System
•
- System Initializing — trigger the rule when the product is being started. This can for example be used to send a
notification when the product restarts.
• Time
Recurrence — trigger the rule periodically, see
-
upload an image every 5 minutes.
Use Schedule — trigger the rule according to the selected schedule, see
-
Available actions include:
• Day/Night Vision Mode — set day mode (IR cut filter on) or night mode (IR cut filter off).
Output Port — activate an I/O port to control an external device.
•
• Play Audio Clip — see
PTZ Control
•
Preset Position — go to a preset position.
-
- Guard Tour — start a guard tour, see
Record Video — record video to a selected storage.
•
• Send Images — send images to a recipient.
Send Notifications — send a notification message to a recipient.
•
Status LED — flash the LED indicator. This can for example be used to validate triggers such as motion detection during
•
product installation and configuration.

Setting Up an Action Rule

An action rule defines the conditions that must be met for the product to perform an action, for example record video or send email
notifications. If multiple conditions are defined, all must be met to trigger the action.
The following example describes how to set up an action rule to record video to a network share if there is movement in the
camera's field of view.
Set up motion detection and add a network share:
1. Go to Detectors > Motion Detection and configure a motion detection window, see
2. Go to System Options > Storage and set up the network share, see
Set up the action rule:
1. Go to Events > Action Rules and click Add.
2. Select Enable rule and enter a descriptive name for the rule.
3. Select Detectors from the Trigger drop-down list.
4. Select Motion Detection from the drop-down list. Select the motion detection window to use.
5. Optionally, select a Schedule and Additional conditions, see below.
6. Under Actions, select Record Video from the Type drop-down list.
7. Select a Stream profile and configure the Duration settings as described below.
Audio Clips, on page 23
.
Guard Tour, on page 26
Recurrences, on page 35
.
page 47
.
33
. This can for example be used to
Schedules, on page 34
.
page 29