Ports And Cables - Hitachi CP-X385W User Manual

Ports and Cables

Refer to the table below to find out which projector port and cable to use for connecting a
given device. Use this table for determining which cables to prepare.
Function
RGB input
RGB output
Audio input
(from the computer)
USB mouse control
PS/2 mouse control
ADB mouse control
Serial mouse control
RS-232C communication
S-video input
Video input
Component video input
Audio input
(from video equipment)
Audio output
NOTE
• This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by
connecting this projector to computers that are VESA DDC (display data channel)
compatible. Please take advantage of this function by connecting the accessory RGB
cable to the RGB IN 1 port (DDC 1/2B compatible). Plug-and-Play may not work
properly if any other type of connection is attempted.
• Plug-and-Play is a system composed of the computer, its operating system and
peripheral equipment (i.e. display devices).
• Please use the standard drivers as this projector is a Plug-and-Play monitor.
• Plug-and-Play may not function properly with some type of computers. Use the RGB
IN 2 port if Plug-and-Play does not function correctly.
Downloaded from www.Manualslib.com
Projector Port
RGB IN 1
RGB IN 2
RGB OUT
AUDIO IN 1
(interlocked with RGB IN 1)
AUDIO IN 2
(interlocked with RGB IN 2)
USB
CONTROL
S-VIDEO IN
VIDEO IN
COMPONENT VIDEO Y
COMPONENT VIDEO C
COMPONENT VIDEO C
AUDIO IN L
AUDIO IN R
AUDIO OUT
About Plug-and-Play Capability
manuals search engine
Connection Cables
Accessory RGB cable or optional RGB
cable with D-sub 15-pin shrink jack and
inch thread screws
Optional audio cable with stereo mini jack
Optional USB cable
Accessory PS/2 mouse cable
Optional ADB mouse cable
Optional serial mouse cable
Optional RS-232C cable
Optional S-video cable with mini DIN 4-pin
jack
Accessory audio/video cable
/P Optional component video cable
B B
/P
R R
Accessory audio/video cable or optional
audio cable with RCA jack
Optional audio cable with stereo mini jack
9