Related Manuals for Honeywell TS33C
Summary of Contents for Honeywell TS33C
-
Page 1: Table Of Contents
PRODUCT OVERVIEW Temperature & Humidity Sensor with BEFORE YOU BEGIN BATTERY INSTALLATION LOW BATTERY WARNING PLACEMENT OF THE REMOTE SENSOR GETTING STARTED TRANSMISSION COLLISION PRECAUTIONS SPECIFICATIONS FCC STATEMENT DECLARATION OF CONFORMITY STANDARD WARRANTY INFORMATION Error! Bookmark not defined. (TS33C) USER MANUAL... -
Page 2: Introduction
INTRODUCTION PRODUCT OVERVIEW Thank you for selecting the Honeywell Temperature and Humidity FEATURES • Remote temperature and humidity transmission to the main Sensor with LCD. This device register, display and transmits temperature and humidity from the remote location to the designated unit via 433 MHz signal •... -
Page 3: Before You Begin
• Selects the temperature display in Celsius or Fahrenheit remote reading is displayed. 2. The effective operating range may be influenced by the surrounding TS33C SENSOR IS COMPATIBLE WITH ALL HONEYWELL building materials and how the receiver (main unit) and transmitter WIRELESS WEATHER STATIONS (remote sensor) are positioned. -
Page 4: Battery Installation
BATTERY INSTALLATION GETTING STARTED NOTE: Install the batteries; select the channel and temperature in After batteries are installed; remote sensor will transmit temperature C° or F° before mounting the remote sensor. and humidity readings at 45 second intervals. • Remove the screws from the battery compartment with a small The main unit may take up to two minutes to receive the initial readings. -
Page 5: Transmission Collision
• Remove the batteries from the main unit and reinstall them in SPECIFICATIONS Remote Temperature the same manner. Proposed operating range with alkaline batteries: • The remote temperature and humidity appeared on the main -20.0°C to + 70.0°C/-4.0°F to + 158°F Proposed operating range with lithium batteries: unit’s display will show that transmission is being received -38.8°C to + 70.0°C/-38.0°F to +158°F... -
Page 6: Fcc Statement
Warning: Changes or modification to this unit not expressly approved declare that the product by the party responsible for compliance could void the user’s authority Product No.: TS33C to operate the equipment. Product Name: Temperature and Humidity Sensor with LCD NOTE: This equipment had been tested and found to comply with the Manufacturer: Hideki Electronics Ltd. -
Page 7: Standard Warranty Information
Meade Instruments Corp. reserves the right to repair or replace the product at our option. Copyright (2010) Meade Instruments Corp. All Rights Reserved. The Honeywell Trademark is used under license from Honeywell International Inc. Honeywell International Inc. makes no representations or warranties...