Kodak 3H0610 Manual page 116

4. Save the list and quit TeachText.
5. Double click on the Apple Printer Utility icon.
6. From the plodding menu, select Window and then Selector.
7. If there is a router on the network, select the appropriate zone for the
printer.
8. Select the printer.
Note: When the Printer is opened, a warning may state that this is a
spooler and that all utility features may not work. Click Continue.
9. Select Download PostScript File from the File menu.
10.Select the file to download.
11.When downloading is complete, quit the program.
If an error occurs while downloading a configuration file, an error
message will appear. If a log file is created after downloading a file, an
error occurred.
9.4.6.1 Using the NIC Config File
The table below lists the NIC configuration options that you can change
by editing and downloading the NIC Config.
Option
EtherTalk phase 1 or (2)
EtherTalk Zone Zone Name
Sockets (Yes) or No
LPD (Yes) or No
Interwar (Yes) or No
EtherTalk (Yes) or No
Set IP address Set IP Address
(0.0.0.0)
Reset the NIC Yes or (No)
Reset NVRAM to Yes or (No)
defaults
Note:
July 1998
Option (Default is in Parenthesis)
Choice
AppleTalk revision level.
AppleTalk zone the printer resides in.
Network Protocols Enabled
Operational Parameters
Use to specify an IP address for NIC when
using TCP/IP.
Forces the NIC to restart when the printer is
power cycled.
Forces NVRAM values to be returned to their
defaults when the printer is power cycled.
Apple/Macintosh Environments
Description
M
A
C
I
N
T
O
S
H
9-7