Zones Of 30 Memory; Storing, Recalling, And Erasing Measurement Data - Invacare ISG4002654 Owner's Manual

Storing, recalling, and erasing
•
Erasing data
*Press "MEMORY" into Memory mode.
*Press and hold on "MODE" button and then press " " button, all
measurement data will be erased.
*To confirm the data has been erased, press the "MEMORY" button
and no data should appear.
When you take a measurement, the monitor automatically stores it in
memory space number one. As you continue to take measurements, the
monitor will push the previous measurement back one space. In other
words, the value in space one will always be the most recent blood pres-
sure measurement taken.
Your monitor features a 3 party memory capability, referred to as 3
zones. Each zone holds up to 30 measurements for a total of 90 mea-
surements. This feature is useful for a user to track their blood pressure
throughout the various periods of the day: morning, afternoon, or night.
Press the " " button to toggle between memory zones 1, 2 and 3. Once
you select a zone in which you want to view the measurements, press
the "MEMORY" button once to view the most recent measurement
along with the time and date that it was taken. Press the "MEMORY"
button again in succession and you will see all of the measurements
registered to that zone. You can then press the " " button to switch to
the next zone to view measurements. The monitor will automatically
power off after about one minute of inactivity.
*When taking measurements, be sure and select the correct zone
number using the " " or " " button so that the measurement is
registered to the appropriate zone.
20
Storing, recalling, and erasing measurement data/3 Zones of 30 Memory
measurement data

3 Zones of 30 Memory