Remote Control Sensor; Eco Sensor - JVC GM-H40L1G Brochure

Outstanding Reliability
Long-life LCD
Unlike plasma monitors, LCD uses backlighting technology to eliminate screen burn-
in. And thanks to the automatic sleep function, the unit will turn off automatically
when no signal is detected from connected equipment after a specified time. This
helps to reduce unnecessary blinking of the backlight, increasing screen life and sav-
ing overall energy consumption.

Remote Control Sensor

To ensure less signal interference, the remote control sensor is located at the upper
corner of the panel. Infrared signal sensitivity of LCD monitors is somewhat better than
that of plasma monitors and the GM-H40L1G's oversized sensor window, which allows
wide-angle reception of the infrared signal, enhances this.

Eco Sensor

The IR remote sensor incorporates an Eco sensor that automatically detects ambient
light and adjusts brightness to reduce excessive luminance, helping to provide more
comfortable viewing while decreasing unnecessary blinking of the backlight.
Array of Enhanced Features
High-speed Input Switching
This feature enables instantaneous switching of two selected inputs and is particularly use-
ful for requirements that call for high-speed input switching, such as security applications.
PIP Pro
Dual display functions, PIP & PBP, are featured on the GM-H40L1G. PIP (Picture-in-Picture)
enables display of a sub-screen — with selectable size and position — in the main screen.
PBP (Picture-by-Picture) will display the main screen and sub- screen side by side with a
user-selectable line separating the two screens.
It is possible for both functions to be displayed in
the widescreen 16:9 ratio and selecting the
appropriate input terminal allows you to choose
between the main screen and sub- screen. PIP
Pro offers many advantages that make it very
suitable for digital signage applications.
Optional IF Cards and Applications
Two slots for optional IF units or cards are available, which are located next to the input
terminals. There are 5 units*/cards available: 1) RGB & component-buffer out unit; 2)
RGB & component unit; 3) HD/SD-SDI unit; 4) SD-SDI unit; and 5) composite unit.
IF-CF01RB RGB/Component Buffer Out
• Just sampling up to UXGA
for display of superb images
without pixel thinning.
• Compatible with 15K analog
RGB signal.
IFCF01CM RGB/Component
• Compressed display of UXGA
images.
• Compatible with 15K analog
RGB signal.
Rear Terminals
PBP Mode
PIP Mode
Main screen Main screen
Sub-screen Sub-screen
*HDMI unit will available in 2006.
Self-diagnostic LED Indicator
A self-diagnostic LED indicator, which will light up or flash in 8
different patterns in the event of a malfunction, is located next
to the Eco sensor. To facilitate servicing, operational history and
temperature changes that take place before a malfunction occurs are recorded in the
display's internal microprocessor. What's more, the 8 pattern indications can be
detected via external control terminals allowing for recognition from a remote location.
Security Lock for Theft Prevention
The GM-H40L1G is fully equipped with security features to lessen the chance of theft.
An original ID can be set via the supplied remote control to lock and disable operation.
There is also a security lock key on the panel mount* that secures the monitor onto the mount.
Control Lock
Control buttons are prominently located at the top of the panel to prevent unintention-
al operation, and these can be locked to deter unwanted operation when the unit is
used in public venues at such as storefronts and exhibits.
Digital Zoom Function
The digital zoom function will allow simple
creation of a multi-screen system without
having to spend extra on costly splitter
products.
Power-on Delay
Once activated, JVC's special Power-on Delay function reduces the load on the stu-
dio's main power supply when multiple units are powered up simultaneously.
• Hour Meters: Dual hour meters are available. The main meter displays
More
features
• 1080/24psF Compatibility:
IF-CF21HD HD/SD-SDI with Embedded Audio
• SDI signal chain connection
capability via bridge out.
• Embedded audio bridged out.
• 1080/24psF and 1080/30p
compatibility.
IF-CF21SD D1-SDI with Embedded Audio
• SDI signal chain connection
capability via bridge out.
• Embedded audio bridged out.
IFCF01PN Composite
• Compatible with NTSC, PAL,
SECAM, PAL-M, PAL-N,
PAL60, and NTSC4.43.
• Capable of handling external
sync signals.
IF-CF01 HDMI (will be available in 2006)
*Security lock is not available for the tabletop stand.
aggregate operating hours while the sub-hour meter
displays daily usage time.
Use of the IF-CF21HD HD/SD-SDI module enables
convenient 1080/24psF compatibility.