Megaraid Storage Manager (Management Pc) - NEC N8100-1220F User Manual

6-20 Installing and Using Utilities
MegaRAID Storage Manager (Management PC)
Install the MegaRAID Storage Manager (hereinafter abbreviated to MSM) in a management PC
that manages servers via the network.
Before attempting to operate MSM, read the "MegaRAID Storage Manager User's Guide"
included in NEC EXPRESSBUILDER CD-ROM. The manual explains the MSM installation
procedure and notes on operating MSM.
IMPORTANT:
Before using Configuration Wizard, Rebuild, or Reconstruction
feature of MegaRAID Storage Manager, make sure the slot number of
disk bays.
The slot number of 3.5-inch disk bay is not displayed when executing
any of these features. You must select a Physical Drive number
assigned for 3.5-inch disk drive. The Physical Drive number that
appears in Physical view at the left of MegaRAID Storage Manager is
not identical to the slot number of 3.5-inch disk bay. Check the slot
number of 3.5-inch disk bay by viewing the Properties view of
MegaRAID Storage Manager.
If you have executed Set Factory Defaults on Adapter Properties menu
of WebBIOS, you must specify the Patrol Read feature again in
MegaRAID Storage Manager. If Patrol Read feature is not used, set
the scheduling of Patrol Read to "Disabled".