Installing Fibre Channel Controller Driver (N8190-127/131)
If you use the Fibre Channel Controller N8190-127/131, you do not need to install the driver
manually. It is automatically installed by Windows Plug-and-Play.
About Windows Activation
Windows Server 2008 must be activated before you can use Windows Server 2008.
Windows activation process is as follows.
For a server running a full installation
1.
Go to the Start menu, and in the Run dialog box, type slui, and press Enter.
IMPORTANT:
already been activated on your system. Click [Close] to exit.
If the following message appears, Windows has
Installing Windows Server 2008 D-27