Advertisement
3. Insert the included spring into one end of a PVC hose with an inner diameter of 10 mm
and thickness of 1.5 mm (not included).
4. Connect the hose (the side with the spring) to the drainage port and position the
other side to where you want the water to drain.
5. Take the included clip and expand it slightly. Clip it firmly at the base of the
drainage port. This clip will be used to secure the drainage hose to the drainage port
(see above diagram).
6. Reinsert the rubber stopper back into the drainage port at the bottom of the unit
when not in use.
Make sure the drainage hose is positioned no higher than 8 inches or above the
height of the unit's base.
Please Note:
1. Make sure the drainage hose is never folded or placed over the drainage port.
2. Reinsert the drainage port with the rubber water stopper when not use.
10
Advertisement
