Auto Operation; Healthy Dehumidification Operation; Air Circulation Operation - LG Wall-Mounted Air Conditioner Owner's Manual

Auto Operation

In this operation mode, the system is automatically operated by the
electronic controls.
- You can set the desired temperature between 64°F and 86°F for Auto
F

Healthy Dehumidification Operation

During Healthy Dehumidification Operation
o If you select the dehumidification mode on the OPERATION MODE
SELECTION BUTTON, the product starts to run the dehumidification function.
It automatically sets the room temperature and airflow volume to the best
condition for dehumidification, based on the sensed current room temperature.
In this case, however, the setting temperature is not displayed on the remote
controller and you are not able to control the room temperature either.
o During the healthy dehumidification function, the fan speed is automatically set
according to the optimization algorithm responding to the current room
temperature status, so that the room condition is kept healthy and comfortable
even in the very humid season.

Air Circulation Operation

Operation mode.
NOTE
You can set the fan speed in this operation mode only from the
installed wired remote controller.
This function properly operates when you use the remote controller
matching each model.
This operation circulates the air without cooling or heating. It can be
activated by pressing the OPERATION MODE SELECTION
BUTTON. Once the air circulation is activated you can select the fan
speed by pressing the INDOOR FAN SPEED SELECTION BUTTON.
NOTE
: During this opertion , 'Cooling' lamp lights up.
Operating Instructions
MODE
MODE
Owner's Manual 13