Camera Tampering; Motion Detection - Axis P1346 User Manual

6. Set the When Activated... parameters, that is, define what the camera should do when the event is active. To upload
images, select Save stream and enter the required information. See Save stream, on page 30.
7. Click OK to save the Event in the Event Types list.
Please see the online help

Camera tampering

The camera tampering application generates an alarm whenever the camera is repositioned, or when the lens is covered,
sprayed, or severely defocused.
First, you must create an event, see How to set up a triggered event, on page 30, for the camera to send an alarm.
Settings
The Minimum duration parameter sets the minimum tampering period, that is an alarm will not be triggered until this period
has lapsed, even if the tampering conditions are otherwise met. This can help prevent false alarms for known conditions that
affect the image.
If the camera lens is sprayed or covered so that the camera live view becomes dark, it will not be possible to distinguish this
situation from other situations where the same effect is seen, such as when lighting conditions change.
When the Alarm for dark images parameter is enabled, alarms are generated for all cases where the lights are either dimmed
or turned off, or if the lens is sprayed, covered, or rendered severely out of focus. If not enabled, no alarm will be sent.
After you define these settings, click Save.

Motion Detection

Motion detection is used to generate an alarm whenever movement occurs (or stops) in the camera's field of view. Up to 10
Include and Exclude windows can be configured:
• Include windows target specific areas within the image.
Exclude windows define areas within an Include window that should be ignored (areas outside Include windows are
•
automatically ignored).
Motion detection windows are configured in the overview image. Once configured, the windows appear in the list of available
triggers for triggered events. See How to set up a triggered event, on page 30.
for descriptions of each available option.
AXIS P1346/-E/AXIS P1347 - Events
31