Scart Socket; External Equipment Connection - Grundig AMIRA32HDBLK Owner's Manual

Headphones
The headphones must have an impedance
of between 8 and 32 ohms and have a 3.5
mm stereo jack plug. Plug the headphone
jack into the headphone socket of the TV.

External equipment connection:

VCR/VCD
DVD/PVR
DECODER
CAMCORDER
VIDEO GAME
VIDEO
R
L
High definition - HD ready
Your television can receive high-
definition signals (HDTV) You can
connect the input sources (HDTV
set-top box or HDTV DVD player)
to the (HDMI) socket (digital HDTV signal).
This ensures that you can view digital HDTV
programmes, even if they are copy-protected
(HDCP High-Definition Copy Protection).
In order to be able to connect an external
device, your TV is equipped with 7 inputs
including antenna input as follows:
1-Antenna input
2-VGA input
3-HDMI input
4-YUV component input
5-S-VHS input
6-SCART input
7-RCA input
You can connect your external device
supporting the suitable inputs to your TV via
these inputs.
By pressing the ( ) button on your
remote control, select the input AV1,
AV
AV2 to which you connected your
device.
INPUT
Your LCD television can also be used as a PC
monitor since it also enables VGA inputs at the
same time.
PC Connection:
Connect the D-Sub15 connector to the PC-IN
input behind your television using a suitable
cable (not supplied with your television).
Using again a suitable cable, you can also listen
to the sound from your PC by connecting the
sound output of your PC to the PC AUDIO-IN
input behind your television.
Transition to the PC mode
For your LCD-TV to pass to the monitor (PC)
mode, press the ( ) on your remote control.
To switch back from the PC mode to the TV
mode, use the ( ) button on your remote control.
-18-

SCART SOCKET