Register A Different Make Of Handset To Your D5 Base; Select A Base - Motorola D5 User Manual

On the handset:
m d
1. Press , scroll to
d
REG BASE
2. Scroll to and press
3. Enter the base number (1 - 4).
The base numbers that are already in use flashes. The
SEARCHING...
display shows
4. When the handset finds the base signal, the display
SEARCHING...X
shows , where
identification number.
5. The display will ask for the PIN to be entered. Enter the
4 digit PIN code (default = 0000) and press
You will hear a beep if the registration is successful.
The handset is automatically assigned an available
handset number. Use this number when making
internal calls.
NOTE
If registration is not successful the first time, please repeat
the process again in case the base registration period ran
out of time. If the base is not found after a few seconds, the
handset returns to standby. Try registering again.
If there are already 5 handsets registered to the base, the
registration will fail. You must de-register another handset
before you can register a new one.
Using additional handsets
m
REGISTER
and press .
m
.
.
X
indicates the base
m
9.2 Register a different make of handset
to your D5 base
IMPORTANT
DECT GAP Profile only guarantees that basic calling
functions will work correctly between different makes/types
of handset and base. There is a possibility that certain
devices such as Caller ID will not work correctly.
On the base:
1. Press and hold the
hear two beeps. The base will remain in registration
mode for 90 seconds.
.
On the handset:
Follow the registration instructions given in your handset's
user guide.
9.3

Select a base

If your D5 handset is registered to more than one base (e.g.
one at work and one at home), you can select which base to
use.
Each handset can be registered with up to four bases.
m
1. Press
The display shows
p
button for 3 seconds until you
d
REGISTER
, scroll to and press
SELECT BASE
.
m
.
29