Advertisement
ConneCting
the jabra Handset 450 for Cisco is plug-and-play.
1. Connect the usb cable to the handset cradle, and then plug
the usb cable into any available usb port on your pC.
2. Dock the jabra Handset 450 for Cisco in the handset cradle.
the handset and the cradle are already paired. to pair a new
handset with the cradle, simply dock the new handset in the
cradle. only one handset can be paired with the cradle at a time.
CHarging
the jabra Handset 450 for Cisco will charge when docked in the
handset cradle. the handset cradle must be plugged into a usb
port, and the pC must be turned on. the battery light will change
to flashing yellow when there is less than one hour of battery
remaining
1 hour of charging = 40% charge
3 hours or charging = 100% charge.
3
Jabra HaNDSET 450 for CiSCo
Advertisement
