TC-Helicon Quintet User Manual page 9

LEVELS KEY
Press to adjust overall
harmony, lead and reverb
levels. Press repeatedly to
cycle through the various level
parameters. Not pressing this
key for a few seconds causes
the unit to revert back to the
preset recall mode.
EDIT/HOLD FOR SETUP
KEY
Press to enter the edit menu.
Press repeatedly to cycle
through preset edit
parameters. All parameters in
the edit menu are stored in
the preset and include
parameters related to
harmony and reverb.
Press and hold to enter the
setup menu. Press
repeatedly to cycle through
the setup parameters. All
parameters in the setup
menu are global and are
active regardless of the
preset.
FRONT PANEL
RECALL KEY
Press RECALL from any
menu (edit or setup), or from
the store mode to return to
top-level preset recall mode.
Press RECALL from recall
mode to recall a preset
(overwriting the current
preset) when the current
preset has been edited or
when previewing a different
preset.
STORE
Press STORE to enter store
mode. Pressing store when in
store mode will store the
current preset to the displayed
location. The STORE key
LED blinks when the current
preset has been edited.
DATA WHEEL
Edits the value of the current
parameter from any menu or
mode.
In recall mode, turning the
wheel previews presets (top
level preset information is
flashed on the display but
preset data is not loaded until
RECALL is pressed again).
HARMONY MUTE
Pressing mutes the harmony
voices. When lit the harmony
voices are muted.
BYPASS
Press to toggle (bypass /
unbypass) all effects.
MIC INPUT
Press to select Mic input for
processing (the line input
becomes an AUX input when
the MIC input is enabled)
-20dB
Press to enable a -20dB pad
on the microphone input.
MIC GAIN
Adjusts Mic Input Gain.
Range: 40dB. This in
combination with the -20dB
pad provides 60dB range of
gain.
7