Using The Osd Menu; Language Settings; Video Settings - Silvercrest KH 6506 Operating Manual

KH 6506

8.1. Using the OSD Menu

To summon the DVD player's OSD Menu...
• Press the "SETUP" button on the remote control.
The OSD Menu with its menu options will appear on the
television screen:
The following menu options can be set:
Language, Video, Audio, Rating and Misc.
• The control buttons
OSD Menu. To confirm a selection or input press the "OK"
button.
• To exit the selected OSD Menu option press the control
button , until the left Menu tab (Language, Video etc.)
is active. Select another Menu tab with the control buttons
and activate the OSD Menu option with the control
button .
• To exit the OSD Menu press the button "SETUP" again.

8.2. Language Settings

You can preset the languages for the OSD-language, DVD-
Menu, Subtitles, Audio and DivX Subtitles functions. These
settings are valid for every DVD if the selected language is
present on the DVD.
- OSD language: Here you set the language, in which the
OSD Menu will be displayed on the tele-
vision screen.
- DVD menu: Here you set the language, in which the
DVD Menu will be displayed on the tele-
vision screen. Not all films contain a menu
on the DVD. If a menu is available then it
can only be shown in the language that
you set if this language is available on
the DVD. If the selected language is not
available then the DVD Menu will be dis-
played in another language.
will move you through the
- Subtitle: Here you set the language of the subtitle
when the playback of a DVD is displayed
on the television screen (only if the lang-
uage is present on the DVD).
- Audio: Here you set the language, in which the
DVD should be started. Films can then
only be played back in the language that
you selected if this language is available
on the DVD. If the selected language is
not available the DVD will start with an-
other language.
- DivX subtitle: Here you set the character encoding for
the DivX Subtitle. The standard setting is
Western European.
- Position: Here you set the position
(Bottom/Middle/Top) of the DivX
Subtitles.

8.3. Video settings

In this OSD menu you can implement the settings for Aspect
Ratio, View Mode, TV-System, Video output, brightness, con-
trast, tint, and color.
- Aspect Ratio: Here you set the Image format, in which
the film should be displayed on the tele-
vision screen (4:3 or 16:9). The correct set-
ting depends on the television to which
you would like to connect the DVD player.
- View Mode: Here you can align the height and width
of the image presentation with the play-
back appliance being used, i.e. Pan &
Scan (Alignment of the wide image for-
mat to the 4:3 presentation).
- TV-System: Here you set the TV-Standard
(PAL/NTSC/Multi) of your playback device.
Only set "Multi" if you have connected
the DVD player to a Multi standard tele-
vision.
- Video-out: Here you set the Video output, through
which the DVD player is connected to the
playback device.
IMPORTANT!
In the event that you set an incorrect Video output, for example
"P-Scan", although your television is not capable of Progressive
Scan, then the television screen will suddenly become black.
This is not a defect of the television or the DVD player!
In a case such as this...
• Press the "STOP" button on the front panel of the DVD
player or on the remote control.
- 10 -