Table of Contents
Advertisement
[II MIDI Foot Pedal Mode
1. Setup Examples
Select this mode for connecting the
FC-l00MK
n
to MIDI equipped devices
via the Roland RMC-1 (optional). From this mode you can select patches.
or use the Control Pedal or two expression pedals. An expansive range of
controls can be achieved through variations in settings.
AC Adaptor
PSA-120, 220 or 240 (Optional)
MID: OUT
MIOI IN
lOUT
Fe-, DOMK IT
FC-100MK
n
MIDI MIX: DFF
EV-5
The
Fe-100MK
II can crontrol a sound module or keyboard. If you connect
the MIDI OUT socket on the external instrument to the MIDI IN on the
RMC-1, the display of the
Fe-,
OO~K
1I will match that of the external device.
(Set the FC-100MK
II
to
MIDI MIX
Off as explained in the following section.)
MIDI OUT
RRC IN
iB
AC Adaptor
PSA-120, 220
or
240
(Optional)
(Optional)
MIDI MIX: ON L! _ _ _
L-.sOL-,!;~-->!_-.!~U
The FC·100MK II ca[l also control a sound module that is at the same time
being controlled by a sequencer. (Set the FC-tOOMK
IT
to
MIDI MIX
On as
explained in the following section.)
*
When connecting RRC cable, be sure to connect the IN socket on one
unit to the OUT socket on the other unit. Do not connect IN to IN or OUT
to DUT_
*
Be sure to connect the RRC cable securely, until it locks in place.
9
Advertisement
Table of Contents
