Network.management; Lan.setup - D-Link ShareCenter DNS-320 User Manual

Section 4 - Configuration
The.LAN.Settings.allows.you.to.enable.LLTD.and.to.configure.the.Link.Speed.and.the.IP.address.as.a.DHCP.client.or.Static.IP.
IP Settings
DHCP Client: Selecting.DHCP.Client.will.cause.the.DNS-320.to.obtain.an.IP.address.
from.the.local.DHCP.server.
Static IP:
Selecting.Static.IP.requires.you.to.assign.the.IP.information.for.the.
DNS-320.manually..
IP Address: Enter.an.IP.address.for.your.device..The.IP.address.of.each.device.
on.the.local.area.network.must.be.within.the.same.IP.address.range.
and.subnet.mask..
Subnet Mask:
Enter.the.Subnet.Mask..The.default.subnet.mask.is.255.255.255.0.
Gateway IP Enter.the.Gateway.IP.Address.for.the.device..The.Gateway.IP.Address.
Address: is.almost.always.the.LAN.address.of.your.router..Most.D-Link.routers.
have.a.default.LAN.IP.address.of.192.168.0.1.
DNS1/ DNS2: Specify.the.first.and.second.DNS.Addresses.for.the.device..The.first.
DNS.address.is.usually.the.LAN.address.of.your.router..A.DNS.Address.
will.allow.the.device.to.resolve.names.into.IP.addresses..Click.Save
Settings.when.finished
D-Link DNS-320 User Manual
Network Management
LAN Setup
60