Grizzly H8236 Owner's Manual page 11

Loading
Brad Nailer
Nail Size ..................................... 18 Gauge
Nail Length ........................................
Magazine Capacity ...................... 100 Nails
To load your brad nailer:
1. DISCONNECT NAILER FROM THE
AIR SUPPLY!
2. Press the magazine latch toward
the front of the nailer, as shown in
Figure 3.
Figure 3. Pressing the magazine latch.
3. Pull the magazine cover back until it
stops.
4. Insert a strip of nails, pointed-end
down, into the magazine as shown in
Figure 4.
Model H8236 2-Piece Brad Nailer/Stapler Kit
OPERATIONS
⁄ "–2"
5
8
Figure 4. Loading nails into brad
magazine.
5. Slide the nails all the way down to the
nose of the nailer.
6. Push the magazine cover forward until
the magazine latch locks it in place.
Stapler
Staple Size ................................. 21 Gauge
Staple Length ...................................
Magazine Capacity .................. 120 Staples
To load your stapler:
1. DISCONNECT STAPLER FROM THE
AIR SUPPLY!
2. Depress the magazine latch lever and
slide the magazine pusher back (see
Figure 5).
Pusher
Latch Lever
Figure 5. Opening stapler magazine.
⁄ "– ⁄ "
1 5
4 8
-9
-