Table of Contents
Advertisement
INSTALLATION OF THE MEDIAMASTER
Connecting to the TV
• Connect the SCART cable between the main SCART socket
on the TV and the TV SCART socket on the Mediamaster.
• Connect the TV aerial to the TV.
Connecting a TV and VCR
Refer to your VCR's manual for full instructions.
• Connect one SCART cable between the main SCART socket
on the TV and the TV SCART socket on the Mediamaster.
• Connect another SCART cable between the VCR
and the AUX SCART socket on the
Mediamaster.
• Connect the RF cable from the RF output on the
VCR to the TV aerial input on the TV.
• Connect the TV aerial to the RF input socket on the VCR.
Connecting an analogue satellite receiver
and a VCR
• Connect a SCART cable between the main SCART socket on
the TV and the TV SCART socket on the Mediamaster.
• Connect a SCART cable between the VCR and the AUX SCART
socket on the Mediamaster.
• Connect an RF cable from the RF output on the VCR to the
TV aerial input on the TV.
• Connect an RF cable from the RF output on the
analogue receiver to the RF input socket on the VCR.
• Connect the TV aerial to the RF input socket on the
analogue receiver.
In order to switch the signal from the dish between the ana-
logue and digital receivers, you need a Nokia smart switch (at
A B in the diagram) or a Universal Twin LNB.
Nokia smart switch
• Connect a coaxial cable between output A on the smart switch
(accessory) to the LNB socket on the analogue receiver.
• Connect a coaxial cable between output B on the smart switch
to the ANTENNA socket on the Mediamaster.
The analogue receiver must be switched OFF (in standby)
when you want to watch digital satellite channels from the
Mediamaster.
1
SCART
SCART
RF
1
SCART
Mediamaster
With Nokia smart
switch
VCR
SCART
RF
1
Mediamaster
Analogue receiver
Nokia smart switch
VCR
NOKIA Smart
priority switch
B
A
GB 13
Advertisement
Table of Contents
