Tone Settings; Enhancement Settings; Display Brightness - Nokia 6800 User Manual

M e n u f u n c t i o n s

Display brightness

You can change the brightness level
of the phone display.
Press Menu and select Settings,
Display settings and
brightness. Move the joystick to the
left to decrease and to the right to
increase the brightness level, and
press OK to accept it.

Tone settings

Press Menu and select
Tone settings. You can find the same
settings in the Profiles
"Profiles (Menu 3)"
that the settings you make, will
change the settings in the active
profile.
Select Incoming call alert
how the phone notifies you of an
incoming voice call. The options are
Ringing, Ascending,
once and Off.
Select Ringing tone
voice calls. To select ringing tones
that have been saved in the Gallery,
select Open gallery
tone list.
Select Ringing volume
Vibrating alert for incoming voice
calls and incoming messages. The
vibrating alert does not work when
the phone is connected to a charger,
a desktop stand, or a car kit.
48
Display
Settings and
menu, see
on page 42. Note
to choose
Ring once, Beep
for incoming
from the ringing
and
Copyright © 2004 Nokia. All rights reserved.
Tip: If you download a
ringing tone or receive one
via OTA, you can save it in
the Gallery.
Select Message alert tone
alert tone for incoming messages,
Keypad tones, or Warning tones
set the phone to sound tones, for
example when the battery is running
out of power.
Select Alert for to set the phone to
ring only on calls from phone
numbers that belong to a selected
caller group. Scroll to the caller
group that you want or
press Mark.

Enhancement settings

Enhancement settings menu is only
shown if the phone is or has been
connected to one of the following
enhancements: headsets HDB-4 or
HDS-3, handsfree unit CARK126 or
mobile inductive loopset LPS-4.
Press Menu and select
Enhancement settings. You can
select Headset, Handsfree
Loopset if the corresponding
enhancement is or has been
connected to the phone.
• Select Default profile
the profile that you want to be
automatically activated when
you connect to the selected
enhancement. You can select
another profile while the
enhancement is connected.
to set the
to
All calls and
Settings and
or
to select