Table of Contents
Advertisement
MAIN MENU
1) Press the Set button for at least 2 seconds to display the
Main menu on the monitor screen.
Main menu
2) Check the current settings at the main menu.
3) Shift the cursor vertically by pushing the Up and Down
buttons, then press the Set button to change the setting of
the selected item.
4) To return to the normal screen, press the Set button.
5) Changed settings are stored in the camera memory (flash
memory) and restore them when the power is switched on.
6) When button operation is not performed for 1 minute during
displaying menu, changed items are saved and menu display
disappears.
Scene file setting
Scene file is a function to record various mode settings and the
adjusted values of the camera at the file.
1) Press the Set button for at least 2 seconds to display the
main menu on the monitor screen.
2) Use UP and Down buttons to move the cursor to MAIN
MENU. push the Right and Left button to change the scene
file.
FILE1<->FILE2<-> FILE3<->FILE4<->FILE5<->FILE1
Factory setting is FILE1.
SHUTTER SPEED
1) Shutter speed can be switched at MAIN MENU. Select
"SHUTTER" by Up (Down) button. Then shutter speed can
be changed by Right/Left button.
[Preset]
1/30(1/25) →1/50 →1/100 →1/250 → 1/500 → 1/1000
→1/2000→1/5000→1/10000→1/20000 →1/50000
→AES→AES&LENS(1/1000)→AES&LENS(1/2000)
→AES&LENS(1/5000)
Factory setting is "1/30".
*
AES&LENS is AES priority mode.
......Seting scene files setting
......Shutter speed setting
......Light control menu
......AGC setting menu
......White balance setting menu
......Sub menu
......Camera title setting menu
......Lens setting menu
......Camera tilte setting menu
LIGHT CONT MENU
Light control menu
Light control menu setting
1) Press the Set button for longer than 2 seconds to display
the Main menu.
Select "LIGHT CONTROL" by Up (Down) button. Then LIGHT
CONTROL MENU can be displayed by Rght,
(1) PEAK/AVE：(PEAK/AVERAGE)
Set the rate of automatic iris PEAK/AVERAGE.
0/100, 15/85, 30/70, 50/50, 75/25, 100/0.
(2)LEVEL： （LEVEL）
Standard level of Automatic exdposure control( AUTO IRIS,
AGC, AES ) (dark)-128 to 0 to127（bright）
(3)ALC GATE： （PEAK/AVERAGE）
Set PEAK/AVERAGE Automatic level control gate.
OFF:Full screen、 Select 1 to 9.
(4) WDR MODE： （Wide dynamic range mode）
Set WDR.
OFF/ON（manual）/AUTO
(5) WDR BLEND： （WDR short/long exposure ratio）
Set WDR short/long exposure ratio.
128（50%）to 255（100%）
Effective only at the time of WDR ON
(6) WDR SHUTTTER：(WDR short exposure shutter speed)
Set the shutter speed of short exposure at the time of WDR
manual mode. Long exposure is set by SHUTTER
command.
(7) WDR LEVEL： （Short exposure shutter desired value of
AUTO）
Short exposure convergence level setting of short exposure
shutter automatic control
0（95%）to 255（110%）
Effective only at the time of WDR Auto mode
7
......Exposure control mode
......Video level adjustment
......Automatic level conrol gate setting
......WDR function setting
......WDR brend ratio setting
......WDR short exposure shutter setting
......WDR short exposure convergence
level setting
Advertisement
Table of Contents
