Controls And Functions - Hitachi CP-DX250 User Manual

Controls and functions

Control panel
1. TEMPerature indicator light
Lights up red if the projector's temperature
becomes too high.
2. LAMP indicator light
Indicates the status of the lamp. Lights up
or flashes when the lamp has developed a
problem.
3. Keystone/Arrow keys (
Down)
Manually corrects distorted images
resulting from an angled projection.
4. Left
Used to hide the screen picture.
5. MODE/ENTER
Selects an available picture setup mode.
Enacts the selected On-Screen Display
(OSD) menu item.
6. SOURCE
Displays the source selection bar.
1
2
3
4
5
6
7.
8.
9.
Up,
10.
7
7
8
9
10
3
POWER indicator light
Lights up or flashes when the projector is
under operation.
I
I
Toggles the projector between standby
mode and on.
Right
Activates panel key lock.
When the On-Screen Display (OSD)
menu is activated, the #3, #4, and #9 keys
are used as directional arrows to select the
desired menu items and to make
adjustments.
MENU
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.