Premium 18/16-input 3/2 and 2/2-bus mixer with xenyx mic
preamps & compressors, klark teknik multi-fx processor,
wireless option and usb/audio interface (18 pages)
Premium 12-input 2/2-bus mixer with xenyx mic preamps & compressors, klark teknik multi-fx processor, wireless option and usb/audio interface (21 pages)
Summary of Contents for Behringer Xenyx QX1202USB
Page 1
CLIP User Manual XENYX QX1202 /QX1002 Premium 12/10-Input 2-Bus Mixer with XENYX Mic Preamps & Compressors, British EQs, KLARK TEKNIK Multi-FX Processor and USB/Audio Interface...
The BEHRINGER XENYX mixing console offers you premium-quality microphone preamplifiers with optional phantom power supply, balanced line inputs and the ability to connect external effects processors. Because of its extensive and carefully thought-out routing possibilities, your XENYX lends itself equally to both live and studio use.
XENYX QX1202USB/QX1002USB User Manual 9. Do not defeat the safety purpose of the polarized TO BIND MUSIC GROUP BY ANY EXPRESS OR IMPLIED Important Safety or grounding-type plug. A polarized plug has two blades UNDERTAKING OR REPRESENTATION. THIS MANUAL Instructions with one wider than the other. A grounding-type plug IS COPYRIGHTED.
• 130 dB dynamic range for an incredible amount of headroom as little noise to it as possible. The XENYX Mic Preamp performs this role beautifully, leaving no traces of noise or sound coloration. Interference that •...
◊ Never connect the XENYX to the power supply unit when the latter is connected to the mains! First connect the power supply unit to the console, then connect the power supply unit to the mains.
Each FX send is mono and features up to +15 dB gain. operates in mono. The stereo channels are designed to handle typical line level As the name suggests, the FX sends of the XENYX mixing consoles are intended to signals. Both inputs will also accept unbalanced connectors.
If a channel is operated in mono via the left line input, this control has the input, so the output of a second XENYX or BEHRINGER ULTRALINK PRO MX882 can same function as the PAN control used in the mono channels.
PC users install the ASIO driver which can be downloaded from behringer.com. ◊ The CLIP-LED’s of your XENYX display the level virtually independent NOTE: The mixer cannot be bus-powered via USB! Always use the included power of frequency. A recording level of 0 dB is recommended for all adaptor to supply power to the mixer.
The extensively equipped software. To monitor the recording signal and listen back to a recorded track, main section of the XENYX mixing consoles provides concrete benefits to you. press the USB/2-TR TO CTRL RM button. This sends the signal returning from your computer to monitor speakers connected to the CONTROL ROOM OUT jacks.
◊ Never connect the XENYX to the power supply unit while the latter is connected to the mains! First connect the console to the power supply Connect the MAIN OUTPUTS to active speakers or a power amplifier. You may also unit, then connect the power supply unit to the mains.
XENYX QX1202USB/QX1002USB User Manual 4.2 Audio connections Balanced ¼" TRS connector You will need a large number of cables for different applications. The illustrations strain relief clamp below show how the connectors should be wired. Be sure to use only sleeve high-grade cables.
QX1202USB QX1002USB Mono Inputs Phones Output Type ¼" TRS connector, unbalanced Microphone Inputs (XENYX Mic Preamp) Type XLR connector, balanced, discrete input circuit Max. output level +21 dBu / 22 Ω (+25 dBm) Mic E.I.N. (20 Hz - 20 kHz) 2-Track Out @ 0 Ω...
Page 14
XENYX QX1202USB/QX1002USB User Manual FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION XENYX QX1202USB/QX1002USB MUSIC Group Services US Inc. Responsible Party Name: 18912 North Creek Parkway, Address: Suite 200 Bothell, WA 98011, Phone: +1 425 672 0816 Phone/Fax No.: Fax: +1 425 673 7647 XENYX QX1202USB/QX1002USB complies with the FCC rules as mentioned in the following paragraph:...