Example: Lens Calibration - NEC iS15-2K User Manual

Cinema Projector: User Manual
iS15-2K
• Press the SELECT
OR press the SELECT
• Press the SELECT
for example, the Firmware menu:
• This is the end of this menu branch.
Press the SELECT
your way back up the menu tree.
OR press the MENU button to return to the Main Menu.

Example: Lens Calibration

• From the Main menu, select the Configuration menu.
• From the Configuration menu, select the Installation menu.
• From the Installation menu, select the Lens Calibrate menu.
• From the Lens Calibrate menu, select Zoom or Fixed.
• Press the SELECT
OR press the ENTER button to start, then again to confirm.
• If Zoom was selected, the projector will calibrate the lens, and initialise the lens
memory. If Fixed was selected, then the zoom buttons will be disabled.
• Press the SELECT
menu and work your way back up the menu tree.
OR press the MENU button to return to the Main Menu.
button or CANCEL button to close the menu
or buttons to show the sub-menus available:
button or the ENTER button, to open one of the menus
button or the CANCEL button to close the menu and work
button or the CANCEL button to close the menu
button or the CANCEL button to close the Lens Calibrate
page 4.7
4. Controlling the projector
Notes
To return to the Main Menu at
any time, press the MENU
button.
For a full listing of all the
menus, see Menu trees, later in
this section.
Lens memory will be initialized
when Lens calibrate is
executed.