Attaching Loader - Koyker 510 Owner's Manual

IMPORTANT:
Never attempt loader attachment on grades which are not reasonably level.
1. Check to be sure that the top surface of both mounting plates are free of bolts, screws or other
obstructions.
2. Drive the tractor carefully between the loader arms far enough to permit hookup of the hydraulic
hoses.
3. Once the hoses have been properly coupled, drive the tractor forward into the loader making sure
the loader members clear all parts of the tractor.
4. Use the bucket cylinders and lift cylinders to align the front yoke of the loader with the yoke
receiver on the tractor. Drive forward until the yoke is fully engaged into the receiver.
5. Use the bucket and lift cylinders to rotate the uprights back onto the mount plates. Make sure the
locator pins fully engage into the holes on the mount plates.
6. To secure loader, install the 3/4 x 2" Grade 8 bolts (included in mount kit) through the mount plate
and into the upright.
7. Prior to operation, be certain to review all safety and operation information contained within this
manual.

ATTACHING LOADER

Page 8