Setting A Destination; Address; City Or Street; Planning Your Trip - Volvo NAVIGATION SYSTEM (VNS) Operating Manual

03 Planning your trip

Setting a destination

Address

03
There are several different ways of program-
ming a destination.
It is enough to only enter the name of a town,
village, etc. to be guided to the center of the
specified town/villages.
If you know the destination's latitude and lon-
gitude, this information can also be used.
44
See page 31 for information about entering
text/numbers in the system's various text
fields.
NOTE
The definition of a city or area may vary from
state to state, and also within the same
state. It will sometimes be an entire city, or
a particular section of a city.

City or street

Street is marked first
Set destination Address
Searching for a destination:
1. With the previous illustration's view on the
screen, press OK to activate the preselec-
ted text field.
2. Enter a name in the Street:
text wheel and then select City:
3. Or select
name.
The following search criteria can be used:
•
Area:
(country)
•
City:
•
Zip code:
a search under
•
Street:
•
Number:
•
Junction:
tion as a destination.
•
Add to itinerary
OK to add the address to the itinerary.
•
Information
display information about the selected
destination.
NOTE
If the number entered does not exist for a
street address, the system will provide infor-
mation to this effect.
field using the
.
City: + OK and begin entering the
a zip code can also be used for
City:
(intersection) select an intersec-
: mark the selection +
: mark the information + OK to