Alpine TMX-R1100E User Manual page 10

BASIC OPERATION
1. Press SEL (SELECT) of the Remote Control for
at least 2 seconds or touch at Sensor Touch
Control for at least 2 seconds to display SETUP
MENU.
2. Press SEL (SELECT) twice or touch at SELECT
twice to switch to System Setting.
Input1
Picture Setting Screen Mode
IR Headphone
Source Name 1
Source Name 2
Audio Level 1
Audio Level 2
Screen Language
Beep Sound
Reset
3. Press / or touch to select each mode and
press or touch ENT to select.
4. Press or touch /
in each mode and press or touch ENT to finish
setting.
IR Headphone
Setting: A / B / OFF (Default : A*)
*Select B when use Headphone that is equipped
with B Channel Selection (SHS-N100 Series, e.g.)
Source Name 1:
Setting: Input 1 / DVD / DVD Head Unit /
DTV / Game / TV / User
(Default: DTV)
Source Name 2:
Setting: Input 2 / DVD / DVD Head Unit /
DTV / Game / TV / User
(Default: DVD)
*It will not function if the Source Name does not
match with the name of the product connecting to
the system.
Audio Level 1 (Setting of Input 1)
Setting: LOW / MID / HIGH
(Default: HIGH)
Audio Level 2 (Setting of Input 2)
Setting: LOW / MID / HIGH
(Default: HIGH)
Screen Language:
Setting: ENGLISH / JAPANESE
(Default: ENGLISH)
Beep Sound:
Setting: ON / OFF
(Default: ON)
Reset:
Press or touch / to reset the unit to factory setting.
All setting such as Picture, Visual EQ, Display Mode
will be reset to default value.
NTSC
System Setting
to select the Setting Detail
Customization of Source Name.
You can define the source name for your favorite
OSD (On Screen Display) for 6 letters.
1. From Step 3, select [Source Name 1] or
[Source Name 2], then select [User] by pressing
or touching /
2. Press or touch ENT.
Letter Setting Menu will be shown up.
3. Press or touch
/
[from A to Z] [0 to 9] [-] and [Space] then press
or touch ENT to finish.
DEL: Once to delete 1 letter.
CLR: Clear all letters.
OK : Confirm the source name and exit from
Letter Setting Menu.
• This setting will not disappear until selection at OK.
Picture Setting
IR Headphone
, / to select letters
System Setting
10