Service Search; Searching Broadcasting Services; Conﬁguring Lnb Settings - Topfield TF 5000 CI Plus User Manual

Digital satellite receiver common interface

Table of Contents

24 Service Search

4.1.1 Conﬁguring LNB settings

After connecting up the digital receiver, you will need to per-

form a service search.

This digital receiver can be operated with both ﬁxed antenna

and motorized antenna. You have to conﬁgure antenna settings

according to your antenna system in the following order:

1. Conﬁgure LNB settings. (Refer to § 4.1.1.)

2. Set the position of your desired satellites if you have

a motorized antenna. You can control the antenna in

DiSEqC 1.2 mode or USALS mode. Refer DiSEqC 1.2 to

§ 4.1.2, and refer USALS to § 4.1.3.

3. Perform service search.

There are in large two frequency bands for satellite broadcasts.

One is C band which ranges approximately from 4 to 6 GHz.

Chapter 4

Service Search

Table of Contents